Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 30mm square micro fan with two wires and a 2-pin connector

OEM Industries

OEM Industries SF30C-12 30mm 12V 0.06A 2 Pin Micro Fan

SKU CH-2283-GZCR9

30 mm ball-bearing micro fan runs on 12 V at 0.06 A with a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • Compact 30 mm micro fan fits tight Raspberry Pi cases
  • 12 V 0.06 A draw keeps power use minimal
  • Ball bearing design extends operating life
  • Two-pin connector enables simple plug-in installation
  • Black low-profile frame blends with board aesthetics

Compact 30 mm Micro Fan for Tight Builds

The OEM Industries SF30C-12 is a 30 mm square micro fan that runs on 12 V and draws 0.06 A through a two-pin connector. Its ball bearing and 30 mm frame suit small-form-factor cases, embedded boards and similar space-constrained cooling tasks.

Suited for Low-Profile Airflow.

Makers adding spot cooling to a Raspberry Pi or similar single-board computer will find the dimensions and voltage a direct match. Builders who need strong static pressure for dense heatsinks or high-wattage CPUs should look at larger fans with higher airflow ratings.

Handles Modest Heat Loads in Confined Spaces

The fan moves enough air for low-power SoCs, router boards or auxiliary component cooling where space is at a premium. It runs out of headroom when tasked with cooling a mainstream desktop processor or any load that demands sustained high-volume airflow.

Privalumai

  • Compact 30 mm micro fan fits tight Raspberry Pi cases
  • 12 V 0.06 A draw keeps power use minimal
  • Ball bearing design extends operating life
  • Two-pin connector enables simple plug-in installation
  • Black low-profile frame blends with board aesthetics

Specifikacijos

ModelSF30C-12
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeBall
Power Connector2 Pin

Klausimai apie šią prekę

What power supply must I already have to run the 12 V SF30C-12 fan?

You need a source that can deliver 12 V at least 0.06 A; the fan draws 12 V and 0.06 A from its 2 pin connector.

Can the 30 mm ball bearing fan fit in the same space as an older 30 mm sleeve bearing unit?

Yes, the SF30C-12 shares the 30 mm frame size, so it occupies the same mounting footprint as other 30 mm fans.

How can I verify the SF30C-12 is spinning correctly after wiring it to 12 V?

Apply 12 V to the 2 pin leads; the ball bearing fan should start immediately and run smoothly without audible rattling.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.