OWC 16GB DDR4 2400MHz CL17 1.2V 260pin Non-ECC SODIMM memory upgrade
- 16GB
- 260-Pin DDR4 Non-EC…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
16 GB DDR4-2133 CL15 UDIMM module built for HP ProDesk 600 G3 SFF and Tower systems
This 16GB DDR4 2133MHz CL15 module is built for HP ProDesk 600 G3 SFF and Tower systems. It targets owners who need more capacity for everyday workloads on these specific desktops. The 288-pin UDIMM fits the factory memory slots without modification. Buyers with other HP models or different DDR generations cannot use this kit.
The module meets JEDEC standard specifications and is RoHS compliant. It runs at the standard 1.2V voltage without requiring BIOS voltage adjustments. There are no bundled accessories, software utilities or heat spreaders included in the package. The 2Rx8 rank configuration works within the motherboard's native memory controller limits.
Installation follows the standard UDIMM procedure: power off, open the chassis, align the notch, and press until the retention clips click. The most common issue is seating the module unevenly so the clips do not engage fully. Another frequent mistake is mixing this 2133MHz stick with faster modules, which forces the system to downclock all memory to the lowest common speed.
| Brand | OWC |
|---|---|
| Part Number | 2U1D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 600 G3 SFF HP ProDesk 600 G3 Tower |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The 16GB DDR4 2133MHz CL15 UDIMM is built to JEDEC standards and tested for long-term reliability; no scheduled replacement is required under normal desktop operation.
The memory operates at 2133MHz CL15 within JEDEC voltage, so the platform's memory-controller throughput ceiling is reached before the module itself throttles.
The non-ECC UDIMM has no heat spreader and draws 1.2V, adding negligible thermal load and zero acoustic noise to the HP ProDesk 600 G3 chassis.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?