暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade for HP ProDesk 600 G3

SKU CH-NBVY-MAP18

16 GB DDR4-2133 CL15 UDIMM module built for HP ProDesk 600 G3 SFF and Tower systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2133 MHz CL15 speed matches the HP ProDesk 600 G3 spec for stable operation
  • 2 V low voltage reduces power draw and heat in the system
  • 288-pin UDIMM form factor fits both SFF and Tower chassis without adapters
  • JEDEC and RoHS compliant for a warranty-safe upgrade

HP ProDesk 600 G3 Memory Upgrade

This 16GB DDR4 2133MHz CL15 module is built for HP ProDesk 600 G3 SFF and Tower systems. It targets owners who need more capacity for everyday workloads on these specific desktops. The 288-pin UDIMM fits the factory memory slots without modification. Buyers with other HP models or different DDR generations cannot use this kit.

JEDEC Compliant 1.2V Operation

The module meets JEDEC standard specifications and is RoHS compliant. It runs at the standard 1.2V voltage without requiring BIOS voltage adjustments. There are no bundled accessories, software utilities or heat spreaders included in the package. The 2Rx8 rank configuration works within the motherboard's native memory controller limits.

Tool-Free DIMM Installation

Installation follows the standard UDIMM procedure: power off, open the chassis, align the notch, and press until the retention clips click. The most common issue is seating the module unevenly so the clips do not engage fully. Another frequent mistake is mixing this 2133MHz stick with faster modules, which forces the system to downclock all memory to the lowest common speed.

特長

  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2133 MHz CL15 speed matches the HP ProDesk 600 G3 spec for stable operation
  • 2 V low voltage reduces power draw and heat in the system
  • 288-pin UDIMM form factor fits both SFF and Tower chassis without adapters
  • JEDEC and RoHS compliant for a warranty-safe upgrade

仕様

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 600 G3 SFF
HP ProDesk 600 G3 Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2Rx8 DDR4 modules need replacement after long-term use?

The 16GB DDR4 2133MHz CL15 UDIMM is built to JEDEC standards and tested for long-term reliability; no scheduled replacement is required under normal desktop operation.

What limit appears first when the 1.2V DIMM runs sustained workloads on the ProDesk 600 G3?

The memory operates at 2133MHz CL15 within JEDEC voltage, so the platform's memory-controller throughput ceiling is reached before the module itself throttles.

How much heat or noise does the 288-pin unbuffered kit add during all-day use?

The non-ECC UDIMM has no heat spreader and draws 1.2V, adding negligible thermal load and zero acoustic noise to the HP ProDesk 600 G3 chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。