אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade for HP ProDesk 600 G3

SKU CH-NBVY-MAP18

16 GB DDR4-2133 CL15 UDIMM module built for HP ProDesk 600 G3 SFF and Tower systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2133 MHz CL15 speed matches the HP ProDesk 600 G3 spec for stable operation
  • 2 V low voltage reduces power draw and heat in the system
  • 288-pin UDIMM form factor fits both SFF and Tower chassis without adapters
  • JEDEC and RoHS compliant for a warranty-safe upgrade

HP ProDesk 600 G3 Memory Upgrade

This 16GB DDR4 2133MHz CL15 module is built for HP ProDesk 600 G3 SFF and Tower systems. It targets owners who need more capacity for everyday workloads on these specific desktops. The 288-pin UDIMM fits the factory memory slots without modification. Buyers with other HP models or different DDR generations cannot use this kit.

JEDEC Compliant 1.2V Operation

The module meets JEDEC standard specifications and is RoHS compliant. It runs at the standard 1.2V voltage without requiring BIOS voltage adjustments. There are no bundled accessories, software utilities or heat spreaders included in the package. The 2Rx8 rank configuration works within the motherboard's native memory controller limits.

Tool-Free DIMM Installation

Installation follows the standard UDIMM procedure: power off, open the chassis, align the notch, and press until the retention clips click. The most common issue is seating the module unevenly so the clips do not engage fully. Another frequent mistake is mixing this 2133MHz stick with faster modules, which forces the system to downclock all memory to the lowest common speed.

נקודות עיקריות

  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2133 MHz CL15 speed matches the HP ProDesk 600 G3 spec for stable operation
  • 2 V low voltage reduces power draw and heat in the system
  • 288-pin UDIMM form factor fits both SFF and Tower chassis without adapters
  • JEDEC and RoHS compliant for a warranty-safe upgrade

מפרט טכני

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 600 G3 SFF
HP ProDesk 600 G3 Tower

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Will the 2Rx8 DDR4 modules need replacement after long-term use?

The 16GB DDR4 2133MHz CL15 UDIMM is built to JEDEC standards and tested for long-term reliability; no scheduled replacement is required under normal desktop operation.

What limit appears first when the 1.2V DIMM runs sustained workloads on the ProDesk 600 G3?

The memory operates at 2133MHz CL15 within JEDEC voltage, so the platform's memory-controller throughput ceiling is reached before the module itself throttles.

How much heat or noise does the 288-pin unbuffered kit add during all-day use?

The non-ECC UDIMM has no heat spreader and draws 1.2V, adding negligible thermal load and zero acoustic noise to the HP ProDesk 600 G3 chassis.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.