OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
16 GB DDR4 2666 ECC unbuffered VLP DIMM for workstations, servers and NAS systems
This 16GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.2V operation. It targets workstations, servers and NAS systems that require error-correcting code memory. The unbuffered 2Rx8 design fits standard 288-pin desktop slots without registration overhead. JEDEC and ROHS compliance ensures a warranty-safe upgrade path.
Operating at the standard 1.2V keeps power draw low and heat output minimal during typical workloads. No heat spreader is fitted, so the VLP profile relies on case airflow for cooling. The low voltage and absence of LEDs contribute to quiet, efficient operation in densely populated DIMM banks.
The module ships as a single 16GB DIMM with no extra cables, brackets or software utilities. OWC validates every stick in-house to meet or exceed OEM specifications for the listed Hynix and Micron part numbers. A limited lifetime warranty and free technical support back the upgrade, but no installation media or monitoring tools are included.
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R816GB |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Power off the system, open the case, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the module reports 16 GB at 2666 MT/s and ECC is enabled; the step most often missed is confirming ECC mode in firmware after the physical install.
No scheduled maintenance is required; keep interior dust-free and ensure the 1.2 V supply remains stable. If a correctable error count rises or the system logs uncorrectable ECC events, replace the module — otherwise it runs for the system life.
The JEDEC 1.2 V / CL19 timing ceiling is reached before thermal throttling; sustained write/read streams max out at the rated 2666 MT/s bandwidth, so throughput plateaus at the spec data rate rather than hitting a temperature wall.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?