NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
16 GB DDR4 2666 ECC unbuffered VLP DIMM for workstations, servers and NAS systems
This 16GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.2V operation. It targets workstations, servers and NAS systems that require error-correcting code memory. The unbuffered 2Rx8 design fits standard 288-pin desktop slots without registration overhead. JEDEC and ROHS compliance ensures a warranty-safe upgrade path.
Operating at the standard 1.2V keeps power draw low and heat output minimal during typical workloads. No heat spreader is fitted, so the VLP profile relies on case airflow for cooling. The low voltage and absence of LEDs contribute to quiet, efficient operation in densely populated DIMM banks.
The module ships as a single 16GB DIMM with no extra cables, brackets or software utilities. OWC validates every stick in-house to meet or exceed OEM specifications for the listed Hynix and Micron part numbers. A limited lifetime warranty and free technical support back the upgrade, but no installation media or monitoring tools are included.
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R816GB |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Power off the system, open the case, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the module reports 16 GB at 2666 MT/s and ECC is enabled; the step most often missed is confirming ECC mode in firmware after the physical install.
No scheduled maintenance is required; keep interior dust-free and ensure the 1.2 V supply remains stable. If a correctable error count rises or the system logs uncorrectable ECC events, replace the module — otherwise it runs for the system life.
The JEDEC 1.2 V / CL19 timing ceiling is reached before thermal throttling; sustained write/read streams max out at the rated 2666 MT/s bandwidth, so throughput plateaus at the spec data rate rather than hitting a temperature wall.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?