OWC 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TS-1232XU TS-1273U
- 16GB
- 288-Pin DDR4 Non-EC…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
16GB DDR4 2666MHz CL19 UDIMM upgrades HP 290 and 295 desktops with JEDEC-compliant 1.2V memory
This OWC module adds 16GB of DDR4 2666MHz memory to compatible HP desktops. It uses a standard 288-pin unbuffered non-ECC design with CL19 latency and 1.2V operation. The kit targets owners of HP 290 G1 through G4 and 295 G6 systems seeking a straightforward capacity increase.
Verify that your desktop is an HP 290 G1, G2, G3, G4 or 295 G6 before ordering. Confirm the motherboard has a free 288-pin DDR4 UDIMM slot and that the existing memory runs at 1.2V. The module is backward compatible with 2133MHz and 2400MHz speeds, so mixed-speed installations will downclock to the slowest module.
The memory meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade for the host system. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme. No heat spreader is fitted, keeping the module low-profile for tight chassis clearances.
| Brand | OWC |
|---|---|
| Part Number | 2U6D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP 290 G1 HP 290 G2 HP 290 G3 HP 290 G4 HP 295 G6 |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The box contains a single 16GB DDR4 2666MHz CL19 1.2V 288-pin UDIMM. No extra parts or tools are required for installation in a compatible HP desktop.
This module is a 16GB DDR4 2666MHz CL19 kit. It is the specific part validated for HP 290 G1 through G4 and 295 G6 systems.
The module will operate at 2666MHz with CL19 latency at 1.2V. It also runs at 2400MHz or 2133MHz if the system requires a lower speed.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?