OWC 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TS-1232XU TS-1273U
- 16GB
- 288-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16GB DDR4 2666MHz CL19 UDIMM upgrades HP 290 and 295 desktops with JEDEC-compliant 1.2V memory
This OWC module adds 16GB of DDR4 2666MHz memory to compatible HP desktops. It uses a standard 288-pin unbuffered non-ECC design with CL19 latency and 1.2V operation. The kit targets owners of HP 290 G1 through G4 and 295 G6 systems seeking a straightforward capacity increase.
Verify that your desktop is an HP 290 G1, G2, G3, G4 or 295 G6 before ordering. Confirm the motherboard has a free 288-pin DDR4 UDIMM slot and that the existing memory runs at 1.2V. The module is backward compatible with 2133MHz and 2400MHz speeds, so mixed-speed installations will downclock to the slowest module.
The memory meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade for the host system. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme. No heat spreader is fitted, keeping the module low-profile for tight chassis clearances.
| Brand | OWC |
|---|---|
| Part Number | 2U6D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP 290 G1 HP 290 G2 HP 290 G3 HP 290 G4 HP 295 G6 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The box contains a single 16GB DDR4 2666MHz CL19 1.2V 288-pin UDIMM. No extra parts or tools are required for installation in a compatible HP desktop.
This module is a 16GB DDR4 2666MHz CL19 kit. It is the specific part validated for HP 290 G1 through G4 and 295 G6 systems.
The module will operate at 2666MHz with CL19 latency at 1.2V. It also runs at 2400MHz or 2133MHz if the system requires a lower speed.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟