OWC 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TS-1232XU TS-1273U
- 16GB
- 288-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
16GB DDR4 2666MHz CL19 UDIMM upgrades HP 290 and 295 desktops with JEDEC-compliant 1.2V memory
This OWC module adds 16GB of DDR4 2666MHz memory to compatible HP desktops. It uses a standard 288-pin unbuffered non-ECC design with CL19 latency and 1.2V operation. The kit targets owners of HP 290 G1 through G4 and 295 G6 systems seeking a straightforward capacity increase.
Verify that your desktop is an HP 290 G1, G2, G3, G4 or 295 G6 before ordering. Confirm the motherboard has a free 288-pin DDR4 UDIMM slot and that the existing memory runs at 1.2V. The module is backward compatible with 2133MHz and 2400MHz speeds, so mixed-speed installations will downclock to the slowest module.
The memory meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade for the host system. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme. No heat spreader is fitted, keeping the module low-profile for tight chassis clearances.
| Brand | OWC |
|---|---|
| Part Number | 2U6D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP 290 G1 HP 290 G2 HP 290 G3 HP 290 G4 HP 295 G6 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The box contains a single 16GB DDR4 2666MHz CL19 1.2V 288-pin UDIMM. No extra parts or tools are required for installation in a compatible HP desktop.
This module is a 16GB DDR4 2666MHz CL19 kit. It is the specific part validated for HP 290 G1 through G4 and 295 G6 systems.
The module will operate at 2666MHz with CL19 latency at 1.2V. It also runs at 2400MHz or 2133MHz if the system requires a lower speed.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม