BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
A 4 GB DDR3 SODIMM running at 1866 MHz with CL13 latency and 1.5 V operation for laptops, mini PCs and NAS systems
This 4GB DDR3 1866 CL13 module uses the 204-pin SO-DIMM form factor and runs at 1.5V. It is built for laptops, all-in-one PCs and compatible NAS appliances such as the QNAP reference RAM-4GDR3LA0-SO-1866. The non-ECC unbuffered design matches standard consumer platforms.
DDR3 1866 (PC3-14900) tops out at the JEDEC-defined 1866 MT/s data rate and CL13 latency. Systems that only support lower DDR3 speeds will down-clock the module automatically. The 1.5V operating voltage is the standard for this generation; 1.35V low-voltage slots cannot use this stick.
Installation requires opening the memory compartment, aligning the notch on the 204-pin edge connector and pressing firmly until the retention clips engage. Common issues include inserting the module at an angle, leaving a clip unlatched or mixing capacities and speeds across slots, which can prevent the system from posting.
| Brand | OWC |
|---|---|
| Part Number | 1S8D31R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
The module is a single 4GB DDR3 1866 CL13 SODIMM; adding a second identical stick doubles capacity to 8GB and enables dual-channel bandwidth on platforms that support it.
It provides a peak transfer rate of 14900 MB/s at 1866 MT/s with CL13 latency, boosting multitasking and large-file handling in compatible DDR3 systems.
The 204-pin DDR3 SO-DIMM form factor runs at 1.5V and is keyed for DDR3 slots only; the memory controller negotiates the highest common JEDEC speed, so the module operates at its rated 1866MHz when the platform supports it.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?