BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278972BTC
Na zalogi
OWC
OWC 1S8D31R804GB 4GB DDR3 1866 CL13 1.5V SODIMM laptop RAM
A 4 GB DDR3 SODIMM running at 1866 MHz with CL13 latency and 1.5 V operation for laptops, mini PCs and NAS systems
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- Voltage1.5V
- ECCNo
- 4GB DDR3 1866 MHz boosts laptop responsiveness
- CL13 latency and 1.5V operation match JEDEC standard
- 204-pin SO-DIMM fits laptops, mini PCs and NAS
- Unbuffered non-ECC design ensures broad system compatibility
- Direct replacement for QNAP RAM-4GDR3LA0-SO-1866 part
OWC 4GB DDR3 1866 SODIMM
This 4GB DDR3 1866 CL13 module uses the 204-pin SO-DIMM form factor and runs at 1.5V. It is built for laptops, all-in-one PCs and compatible NAS appliances such as the QNAP reference RAM-4GDR3LA0-SO-1866. The non-ECC unbuffered design matches standard consumer platforms.
DDR3 1866 practical limits
DDR3 1866 (PC3-14900) tops out at the JEDEC-defined 1866 MT/s data rate and CL13 latency. Systems that only support lower DDR3 speeds will down-clock the module automatically. The 1.5V operating voltage is the standard for this generation; 1.35V low-voltage slots cannot use this stick.
Straightforward laptop installation
Installation requires opening the memory compartment, aligning the notch on the 204-pin edge connector and pressing firmly until the retention clips engage. Common issues include inserting the module at an angle, leaving a clip unlatched or mixing capacities and speeds across slots, which can prevent the system from posting.
Poudarki
- 4GB DDR3 1866 MHz boosts laptop responsiveness
- CL13 latency and 1.5V operation match JEDEC standard
- 204-pin SO-DIMM fits laptops, mini PCs and NAS
- Unbuffered non-ECC design ensures broad system compatibility
- Direct replacement for QNAP RAM-4GDR3LA0-SO-1866 part
Specifikacije
| Brand | OWC |
|---|---|
| Part Number | 1S8D31R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Vprašanja o tem izdelku
Should I pick the 4GB module or add a second stick for 8GB total?
The module is a single 4GB DDR3 1866 CL13 SODIMM; adding a second identical stick doubles capacity to 8GB and enables dual-channel bandwidth on platforms that support it.
What does the PC3-14900 1866MHz rating deliver in my laptop or NAS?
It provides a peak transfer rate of 14900 MB/s at 1866 MT/s with CL13 latency, boosting multitasking and large-file handling in compatible DDR3 systems.
Does the 204-pin DDR3 SO-DIMM interface limit the speed I actually see?
The 204-pin DDR3 SO-DIMM form factor runs at 1.5V and is keyed for DDR3 slots only; the memory controller negotiates the highest common JEDEC speed, so the module operates at its rated 1866MHz when the platform supports it.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
