BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
A 4 GB DDR3 SODIMM running at 1866 MHz with CL13 latency and 1.5 V operation for laptops, mini PCs and NAS systems
This 4GB DDR3 1866 CL13 module uses the 204-pin SO-DIMM form factor and runs at 1.5V. It is built for laptops, all-in-one PCs and compatible NAS appliances such as the QNAP reference RAM-4GDR3LA0-SO-1866. The non-ECC unbuffered design matches standard consumer platforms.
DDR3 1866 (PC3-14900) tops out at the JEDEC-defined 1866 MT/s data rate and CL13 latency. Systems that only support lower DDR3 speeds will down-clock the module automatically. The 1.5V operating voltage is the standard for this generation; 1.35V low-voltage slots cannot use this stick.
Installation requires opening the memory compartment, aligning the notch on the 204-pin edge connector and pressing firmly until the retention clips engage. Common issues include inserting the module at an angle, leaving a clip unlatched or mixing capacities and speeds across slots, which can prevent the system from posting.
| Brand | OWC |
|---|---|
| Part Number | 1S8D31R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
The module is a single 4GB DDR3 1866 CL13 SODIMM; adding a second identical stick doubles capacity to 8GB and enables dual-channel bandwidth on platforms that support it.
It provides a peak transfer rate of 14900 MB/s at 1866 MT/s with CL13 latency, boosting multitasking and large-file handling in compatible DDR3 systems.
The 204-pin DDR3 SO-DIMM form factor runs at 1.5V and is keyed for DDR3 slots only; the memory controller negotiates the highest common JEDEC speed, so the module operates at its rated 1866MHz when the platform supports it.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?