Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

OWC

OWC 4GB (2x2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit

SKU CH-XZF5-RNFV6

Dual-channel 4 GB DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Kit purpose and fit

This OWC dual-channel kit supplies two 200-pin DDR2 SO-DIMM modules totalling 4GB for laptops, all-in-one desktops or NAS units that accept PC2-5300 memory. It is intended for owners of compatible legacy systems who want a straightforward capacity increase.

Capacity and headroom

Each module is a 2GB, 2Rx8 unbuffered DIMM rated at 667 MT/s with CL5 latency at 1.8V. The pair adds 4GB of addressable memory; systems limited to lower maximums or different DDR generations will not benefit.

Compliance and support

The modules are JEDEC-standard and RoHS compliant, tested to meet OEM specifications for a warranty-safe upgrade. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme.

Erősségek

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Műszaki adatok

BrandOWC
Part Number5S3D22R8004P
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will these two 2 GB DDR2 667 CL5 SODIMMs run in dual-channel with the single 1 GB stick already in my laptop?

The kit is a matched dual-channel pair of 2 GB modules at 667 MHz CL5; adding a third stick of different capacity or timing will force the controller to run all modules in single-channel mode.

How can I verify the 667 MHz CL5 speed is active after I install both modules?

Open the BIOS or a system-information tool such as CPU-Z and confirm the memory tab shows 667 MHz (PC2-5300) with CAS latency 5 for both slots.

Does the package include anything besides the two 200-pin SODIMMs, and do I need a screwdriver?

Only the two 2 GB DDR2 SODIMMs are in the box; a small Phillips screwdriver is required to open the memory compartment on most laptops.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.