Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

OWC

OWC 4GB (2x2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit

SKU CH-XZF5-RNFV6

Dual-channel 4 GB DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Kit purpose and fit

This OWC dual-channel kit supplies two 200-pin DDR2 SO-DIMM modules totalling 4GB for laptops, all-in-one desktops or NAS units that accept PC2-5300 memory. It is intended for owners of compatible legacy systems who want a straightforward capacity increase.

Capacity and headroom

Each module is a 2GB, 2Rx8 unbuffered DIMM rated at 667 MT/s with CL5 latency at 1.8V. The pair adds 4GB of addressable memory; systems limited to lower maximums or different DDR generations will not benefit.

Compliance and support

The modules are JEDEC-standard and RoHS compliant, tested to meet OEM specifications for a warranty-safe upgrade. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme.

Pluspunten

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Specificaties

BrandOWC
Part Number5S3D22R8004P
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will these two 2 GB DDR2 667 CL5 SODIMMs run in dual-channel with the single 1 GB stick already in my laptop?

The kit is a matched dual-channel pair of 2 GB modules at 667 MHz CL5; adding a third stick of different capacity or timing will force the controller to run all modules in single-channel mode.

How can I verify the 667 MHz CL5 speed is active after I install both modules?

Open the BIOS or a system-information tool such as CPU-Z and confirm the memory tab shows 667 MHz (PC2-5300) with CAS latency 5 for both slots.

Does the package include anything besides the two 200-pin SODIMMs, and do I need a screwdriver?

Only the two 2 GB DDR2 SODIMMs are in the box; a small Phillips screwdriver is required to open the memory compartment on most laptops.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.