Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

OWC

OWC 4GB (2x2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit

SKU CH-XZF5-RNFV6

Dual-channel 4 GB DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Kit purpose and fit

This OWC dual-channel kit supplies two 200-pin DDR2 SO-DIMM modules totalling 4GB for laptops, all-in-one desktops or NAS units that accept PC2-5300 memory. It is intended for owners of compatible legacy systems who want a straightforward capacity increase.

Capacity and headroom

Each module is a 2GB, 2Rx8 unbuffered DIMM rated at 667 MT/s with CL5 latency at 1.8V. The pair adds 4GB of addressable memory; systems limited to lower maximums or different DDR generations will not benefit.

Compliance and support

The modules are JEDEC-standard and RoHS compliant, tested to meet OEM specifications for a warranty-safe upgrade. OWC includes a limited lifetime warranty with free technical support and an advanced replacement programme.

Pontos fortes

  • Dual-channel kit doubles bandwidth with two matched 2 GB modules
  • JEDEC-standard DDR2 667 PC2-5300 CL5 ensures broad laptop compatibility
  • 8 V operation matches factory voltage for stable upgrades
  • Unbuffered non-ECC design suits mainstream notebooks and all-in-one systems
  • 200-pin SO-DIMM form factor fits DDR2 slots directly

Especificações

BrandOWC
Part Number5S3D22R8004P
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will these two 2 GB DDR2 667 CL5 SODIMMs run in dual-channel with the single 1 GB stick already in my laptop?

The kit is a matched dual-channel pair of 2 GB modules at 667 MHz CL5; adding a third stick of different capacity or timing will force the controller to run all modules in single-channel mode.

How can I verify the 667 MHz CL5 speed is active after I install both modules?

Open the BIOS or a system-information tool such as CPU-Z and confirm the memory tab shows 667 MHz (PC2-5300) with CAS latency 5 for both slots.

Does the package include anything besides the two 200-pin SODIMMs, and do I need a screwdriver?

Only the two 2 GB DDR2 SODIMMs are in the box; a small Phillips screwdriver is required to open the memory compartment on most laptops.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.