Phanteks PH-F200SP_BBK 200mm Case Fan 850 RPM 110.1 CFM 25 dB UFB Bearing
- 1 Fan
- No Controller
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Phanteks
A 200 mm case fan delivering 110.1 CFM at 25.0 dB(A) with UFB bearing and angled MVB blades
The Phanteks PH-F200SP_BK is a 200 mm case fan built for high-volume air movement in compatible chassis. Its nine Maelström Vortex Booster blades are angled lower to increase static pressure while maintaining broad airflow coverage. The black frame and white blades suit clean internal aesthetics.
At the rated 850 ± 250 rpm the fan delivers 110.1 CFM while the Updraft Floating Balance bearing keeps operating noise to 25.0 dB(A). The MOSS and SSC systems balance the hub-tip ratio to suppress vibration and extend rotational stability. The reinforced back frame adds structural rigidity for continuous duty.
The box includes a 400 mm extension cable so the 3-pin connector can reach distant headers without strain. Four dedicated fan screws secure the 200.00 x 200.00 x 30.00 mm frame to standard mounting points. No software or lighting controllers are bundled.
| Brand | Phanteks |
|---|---|
| Model | PH-F200SP_BK |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 200mm |
| Bearing Type | UFB (Updraft Floating Balance) |
| RPM | 850 +/- 250 rpm |
| Air Flow | 110.1 CFM |
| Noise Level | 25.0 dB(A) |
| Power Connector | 3 Pin |
| Color | Black Frame / White Blades |
| Features | The new PH-F200SP blades are angled lower to achieve higher air pressure. The redesigned MVB blades generate better performance and better airflow. It improves the balance of airflow and air pressure when being used as a case fan. The PH-F200SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. With noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibrati |
| Dimensions | 200.00 x 200.00 x 30.00mm |
| Package Contents | 1 x 200 mm Premium Fan 1 x 400 mm Extension Cable 4 x Fan Screws |
| Szállítási súly | 0.40 kg |
| Csomagméret | 257 × 246 × 38 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Mount the fan using the four supplied screws through the 200mm frame holes, then connect the 3‑pin header to the motherboard or use the 400mm extension cable to reach a distant fan header.
The Updraft Floating Balance bearing is sealed and lubricated for life, so no re‑oiling or user service is required; only occasional dust removal from the blades and frame is needed.
The fan runs at 25.0 dB(A) at its rated 850 rpm, and the UFB bearing is designed to keep vibration‑induced noise low even under sustained load.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?