Phanteks PH-F200SP_BBK 200mm Case Fan 850 RPM 110.1 CFM 25 dB UFB Bearing
- 1 Fan
- No Controller
Phanteks
A 200 mm case fan delivering 110.1 CFM at 25.0 dB(A) with UFB bearing and angled MVB blades
The Phanteks PH-F200SP_BK is a 200 mm case fan built for high-volume air movement in compatible chassis. Its nine Maelström Vortex Booster blades are angled lower to increase static pressure while maintaining broad airflow coverage. The black frame and white blades suit clean internal aesthetics.
At the rated 850 ± 250 rpm the fan delivers 110.1 CFM while the Updraft Floating Balance bearing keeps operating noise to 25.0 dB(A). The MOSS and SSC systems balance the hub-tip ratio to suppress vibration and extend rotational stability. The reinforced back frame adds structural rigidity for continuous duty.
The box includes a 400 mm extension cable so the 3-pin connector can reach distant headers without strain. Four dedicated fan screws secure the 200.00 x 200.00 x 30.00 mm frame to standard mounting points. No software or lighting controllers are bundled.
| Brand | Phanteks |
|---|---|
| Model | PH-F200SP_BK |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 200mm |
| Bearing Type | UFB (Updraft Floating Balance) |
| RPM | 850 +/- 250 rpm |
| Air Flow | 110.1 CFM |
| Noise Level | 25.0 dB(A) |
| Power Connector | 3 Pin |
| Color | Black Frame / White Blades |
| Features | The new PH-F200SP blades are angled lower to achieve higher air pressure. The redesigned MVB blades generate better performance and better airflow. It improves the balance of airflow and air pressure when being used as a case fan. The PH-F200SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. With noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibrati |
| Dimensions | 200.00 x 200.00 x 30.00mm |
| Package Contents | 1 x 200 mm Premium Fan 1 x 400 mm Extension Cable 4 x Fan Screws |
| 배송 무게 | 0.40 kg |
| 포장 크기 | 257 × 246 × 38 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Mount the fan using the four supplied screws through the 200mm frame holes, then connect the 3‑pin header to the motherboard or use the 400mm extension cable to reach a distant fan header.
The Updraft Floating Balance bearing is sealed and lubricated for life, so no re‑oiling or user service is required; only occasional dust removal from the blades and frame is needed.
The fan runs at 25.0 dB(A) at its rated 850 rpm, and the UFB bearing is designed to keep vibration‑induced noise low even under sustained load.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?