Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Phanteks
Complete DIY water-cooling kit with 360mm radiator, CPU block, reservoir, three 120mm RGB fans, 3 metres of clear PVC tubing.
The Phanteks Glacier EZ-Fit 360 D30-KIT is a complete DIY water-cooling kit that includes a CPU block, reservoir, 360mm radiator, three 120mm fans, hard tubing and bending tools. It supports Intel LGA 1700 and AMD AM4/AM5 sockets. The white finish and RGB lighting suit builders who want a coordinated aesthetic. Everything required for a custom loop arrives in one box.
This kit replaces stock air coolers or closed-loop AIOs when lower noise and higher thermal headroom are priorities. The jump is worth it if the case fits a 360mm radiator and the builder wants full control over tubing runs. It is not for buyers who need a drop-in solution without case modifications or who prefer maintenance-free cooling.
Integrated fittings on the block, radiator and reservoir simplify assembly, while the supplied tube cutter, bending insert, guides and sandpaper help shape the 3 meters of clear PVC tubing. The 24-pin jumper allows pump testing before the system powers on. Common issues include measuring tube lengths incorrectly and leaving air bubbles trapped in the loop.
| Brand | Phanteks |
|---|---|
| Model | PH-GEF_KIT360-D30_DWT |
| Type | Complete DIY Water-Cooling Kit |
| Block Compatibility | Intel: LGA 1700 AMD: AM4 /AM5 |
| Block Dim. | 72 x 64 x 25.7mm (2.83 x 2.52 x 1in) |
| Radiator Size | 360mm |
| Fan Size | 3 Fan Slots (120 mm) |
| Tube Dim. | 3 meters |
| Tube Material | Clear PVC |
| Package Contents | PH-GEF_RAD363_WT 1x PH-GEF_CPU450_DWT 1x PH-GEF_RES140_DWT 1x PH-GEF_ST16_CL 1x PH-GEF_HT16_FR 4x PH-F120D30_DRGB_PWM_WT01_3P 1x Tube Cutter 1x Bending Insert 1x Bending Guides 1x Squeeze Bottle 1x 24-Pin Jumper 1x Sandpaper 1x Tool Set Manual 1x GLACIER EZ-FIT KIT Manual 1x |
| Szállítási súly | 7.33 kg |
| Csomagméret | 978 × 406 × 244 mm |
The radiator is 360mm long and uses three 120mm fan slots; verify your case supports a 360mm radiator with 30mm thickness plus fan depth.
Use the supplied bending insert and guides, heat the clear PVC tube evenly, then bend over the guide; the tube cutter and sandpaper prepare clean ends for the compression fittings.
Inspect tubing every 12 months for clouding or plasticiser buildup; drain, flush with distilled water, and refill with fresh coolant at that interval.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?