Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Phanteks Glacier EZ-Fit 360 D30 white DIY water-cooling kit with CPU block, reservoir, 360mm radiator, three 120mm fans

Phanteks

Phanteks PH-GEF_KIT360-D30_DWT 360mm DIY cooling

SKU CH-S5J3-E03TP MPN PH-GEF_KIT360-D30_DWT

Complete DIY water-cooling kit with 360mm radiator, CPU block, reservoir, three 120mm RGB fans, 3 metres of clear PVC tubing.

  • TypeComplete DIY Water-Cooling Kit
  • Block CompatibilityIntel: LGA 1700 AMD: AM4 /AM5
  • Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
  • Radiator Size360mm
  • Fan Size3 Fan Slots (120 mm)
  • Tube Dim.3 meters
  • Complete kit includes every part for a custom loop
  • Integrated fittings on blocks, radiator and reservoir simplify assembly
  • 360 mm radiator with three 120 mm fans delivers high heat capacity
  • CPU block fits Intel LGA 1700 and AMD AM4/AM5 sockets
  • Bending tools and 3 m clear PVC tubing enable hard-tube builds

Complete DIY Water-Cooling Kit

The Phanteks Glacier EZ-Fit 360 D30-KIT is a complete DIY water-cooling kit that includes a CPU block, reservoir, 360mm radiator, three 120mm fans, hard tubing and bending tools. It supports Intel LGA 1700 and AMD AM4/AM5 sockets. The white finish and RGB lighting suit builders who want a coordinated aesthetic. Everything required for a custom loop arrives in one box.

Upgrade From Air Or AIO Cooling

This kit replaces stock air coolers or closed-loop AIOs when lower noise and higher thermal headroom are priorities. The jump is worth it if the case fits a 360mm radiator and the builder wants full control over tubing runs. It is not for buyers who need a drop-in solution without case modifications or who prefer maintenance-free cooling.

Installation With Included Tools

Integrated fittings on the block, radiator and reservoir simplify assembly, while the supplied tube cutter, bending insert, guides and sandpaper help shape the 3 meters of clear PVC tubing. The 24-pin jumper allows pump testing before the system powers on. Common issues include measuring tube lengths incorrectly and leaving air bubbles trapped in the loop.

Kohokohdat

  • Complete kit includes every part for a custom loop
  • Integrated fittings on blocks, radiator and reservoir simplify assembly
  • 360 mm radiator with three 120 mm fans delivers high heat capacity
  • CPU block fits Intel LGA 1700 and AMD AM4/AM5 sockets
  • Bending tools and 3 m clear PVC tubing enable hard-tube builds

Tekniset tiedot

BrandPhanteks
ModelPH-GEF_KIT360-D30_DWT
TypeComplete DIY Water-Cooling Kit
Block CompatibilityIntel: LGA 1700
AMD: AM4 /AM5
Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
Radiator Size360mm
Fan Size3 Fan Slots (120 mm)
Tube Dim.3 meters
Tube MaterialClear PVC
Package ContentsPH-GEF_RAD363_WT 1x
PH-GEF­_CPU450_DWT 1x
PH-GEF_RES140_DWT 1x
PH-GEF_ST16_CL 1x
PH-GEF_HT16_FR 4x
PH-F120D30_DRGB_PWM_WT01_3P 1x
Tube Cutter 1x
Bending Insert 1x
Bending Guides 1x
Squeeze Bottle 1x
24-Pin Jumper 1x
Sandpaper 1x
Tool Set Manual 1x
GLACIER EZ-FIT KIT Manual 1x
Lähetyspaino7.33 kg
Pakkauksen mitat978 × 406 × 244 mm

Kysymyksiä tästä tuotteesta

What clearance does the 360mm radiator and 120mm fans need inside my case?

The radiator is 360mm long and uses three 120mm fan slots; verify your case supports a 360mm radiator with 30mm thickness plus fan depth.

How do I bend the 16mm hard tubes without kinking them?

Use the supplied bending insert and guides, heat the clear PVC tube evenly, then bend over the guide; the tube cutter and sandpaper prepare clean ends for the compression fittings.

When should I replace the clear PVC tubing and coolant?

Inspect tubing every 12 months for clouding or plasticiser buildup; drain, flush with distilled water, and refill with fresh coolant at that interval.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.