PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
PNY Technologies, Inc.
M.2 2280 drive with 1TB of 3D NAND storage and PCI-Express 3.0 x4 NVMe 1.3 interface for sequential reads up to 3500 MBps and writes up to 1800 MBps
Options 1TB CS2130
This PNY CS2130 is a 1TB internal SSD built for consumer PCs and laptops. It uses 3D NAND flash and an M.2 2280 form factor. The drive targets faster boot times and quicker application launches. Low power consumption keeps it cool and quiet during everyday workloads.
The drive connects through a PCI-Express 3.0 x4 link with NVMe 1.3 protocol. Sequential reads reach up to 3500 MBps and writes up to 1800 MBps on that interface. Bandwidth is capped by the Gen 3 x4 electrical ceiling. Sustained throughput will fall below peak once the controller exhausts its SLC cache.
One terabyte holds an operating system, common applications and a large media library with room to spare. The 2,000,000-hour MTBF rating reflects long-term reliability for typical consumer write volumes. Heavy, sustained write workloads will eventually hit the sequential write ceiling of 1800 MBps. Operating temperature range spans 0°C to 70°C.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 1,800 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Szállítási súly | 1.56 kg |
| Csomagméret | 130 × 99 × 15 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
This listing is the 1TB model; if you need more space you would have to select a different capacity from the same series.
It is the maximum sequential read speed the controller can deliver over a PCIe 3.0 x4 link; real-world speeds depend on workload, thermal conditions and the host controller.
It uses a PCI-Express 3.0 x4 connection with NVMe 1.3 protocol, which sets the upper limit for the 3500 MBps read and 1800 MBps write ratings.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?