PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
PNY Technologies, Inc.
M.2 2280 drive with 1TB of 3D NAND storage and PCI-Express 3.0 x4 NVMe 1.3 interface for sequential reads up to 3500 MBps and writes up to 1800 MBps
Options 1TB CS2130
This PNY CS2130 is a 1TB internal SSD built for consumer PCs and laptops. It uses 3D NAND flash and an M.2 2280 form factor. The drive targets faster boot times and quicker application launches. Low power consumption keeps it cool and quiet during everyday workloads.
The drive connects through a PCI-Express 3.0 x4 link with NVMe 1.3 protocol. Sequential reads reach up to 3500 MBps and writes up to 1800 MBps on that interface. Bandwidth is capped by the Gen 3 x4 electrical ceiling. Sustained throughput will fall below peak once the controller exhausts its SLC cache.
One terabyte holds an operating system, common applications and a large media library with room to spare. The 2,000,000-hour MTBF rating reflects long-term reliability for typical consumer write volumes. Heavy, sustained write workloads will eventually hit the sequential write ceiling of 1800 MBps. Operating temperature range spans 0°C to 70°C.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 1,800 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Prepravná hmotnosť | 1.56 kg |
| Rozmery balenia | 130 × 99 × 15 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
This listing is the 1TB model; if you need more space you would have to select a different capacity from the same series.
It is the maximum sequential read speed the controller can deliver over a PCIe 3.0 x4 link; real-world speeds depend on workload, thermal conditions and the host controller.
It uses a PCI-Express 3.0 x4 connection with NVMe 1.3 protocol, which sets the upper limit for the 3500 MBps read and 1800 MBps write ratings.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?