PNY Technologies, Inc. CS1030 M280CS1030-1TB-RB 1TB internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
PNY Technologies, Inc.
500 GB M.2 2280 internal SSD with NVMe 1.3 interface delivering up to 2000 MB/s read and 1100 MB/s write speeds
Options 500GB CS1030
The PNY CS1030 is a 500GB internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and the NVMe 1.3 protocol to deliver faster boot times and quicker application launches. Sequential reads reach up to 2000 MB/s and writes up to 1100 MB/s. The drive has no moving parts and an MTBF of 2000000 hours.
Your motherboard or laptop must provide an M.2 2280 slot keyed for NVMe PCIe 3.0 x4 operation. Verify the firmware supports NVMe 1.3 boot if you plan to use this as the primary OS drive. Confirm the physical clearance allows a single-sided 4.00mm module. Older platforms limited to SATA or PCIe 2.0 will not achieve the stated speeds.
The drive operates between 0°C and 70°C and stores safely from -40°C to 85°C. Low power consumption helps extend battery life in laptops and keeps heat output minimal. With no moving parts the drive runs silently. Typical workloads stay well within the thermal envelope without active cooling.
| Brand | PNY |
|---|---|
| Series | CS1030 |
| Model | M280CS1030-500-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2000 MBps |
| Max Sequential Write | Up to 1100 MBps |
| MTBF | 2,000,000 hours |
| Features | Sequential Read of up to 2,000 MB/s and Write of up to 1,100 MB/s Faster boot up and quicker application launch Better overall system performance Highly durable, with not moving parts and can withstand extreme environments Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Szállítási súly | 0.03 kg |
| Csomagméret | 148 × 100 × 16 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive is supplied as a bare M.2 2280 module; no heatsink or mounting screw is included.
The 500GB model delivers up to 2000 MB/s read and 1100 MB/s write; larger capacities in the same series typically offer higher sustained write performance.
Yes, the drive is rated for up to 2000 MB/s sequential read and 1100 MB/s sequential write over a PCIe 3.0 x4 NVMe 1.3 link.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?