PNY Technologies, Inc. CS1030 M280CS1030-1TB-RB 1TB internal SSD
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
PNY Technologies, Inc.
500 GB M.2 2280 internal SSD with NVMe 1.3 interface delivering up to 2000 MB/s read and 1100 MB/s write speeds
Options 500GB CS1030
The PNY CS1030 is a 500GB internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and the NVMe 1.3 protocol to deliver faster boot times and quicker application launches. Sequential reads reach up to 2000 MB/s and writes up to 1100 MB/s. The drive has no moving parts and an MTBF of 2000000 hours.
Your motherboard or laptop must provide an M.2 2280 slot keyed for NVMe PCIe 3.0 x4 operation. Verify the firmware supports NVMe 1.3 boot if you plan to use this as the primary OS drive. Confirm the physical clearance allows a single-sided 4.00mm module. Older platforms limited to SATA or PCIe 2.0 will not achieve the stated speeds.
The drive operates between 0°C and 70°C and stores safely from -40°C to 85°C. Low power consumption helps extend battery life in laptops and keeps heat output minimal. With no moving parts the drive runs silently. Typical workloads stay well within the thermal envelope without active cooling.
| Brand | PNY |
|---|---|
| Series | CS1030 |
| Model | M280CS1030-500-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2000 MBps |
| Max Sequential Write | Up to 1100 MBps |
| MTBF | 2,000,000 hours |
| Features | Sequential Read of up to 2,000 MB/s and Write of up to 1,100 MB/s Faster boot up and quicker application launch Better overall system performance Highly durable, with not moving parts and can withstand extreme environments Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Verzendgewicht | 0.03 kg |
| Pakketafmetingen | 148 × 100 × 16 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The drive is supplied as a bare M.2 2280 module; no heatsink or mounting screw is included.
The 500GB model delivers up to 2000 MB/s read and 1100 MB/s write; larger capacities in the same series typically offer higher sustained write performance.
Yes, the drive is rated for up to 2000 MB/s sequential read and 1100 MB/s sequential write over a PCIe 3.0 x4 NVMe 1.3 link.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?