PNY Technologies, Inc. CS1030 M280CS1030-1TB-RB 1TB internal SSD
- Internal Solid Stat…
- Consumer
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
PNY Technologies, Inc.
500 GB M.2 2280 internal SSD with NVMe 1.3 interface delivering up to 2000 MB/s read and 1100 MB/s write speeds
Options 500GB CS1030
The PNY CS1030 is a 500GB internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and the NVMe 1.3 protocol to deliver faster boot times and quicker application launches. Sequential reads reach up to 2000 MB/s and writes up to 1100 MB/s. The drive has no moving parts and an MTBF of 2000000 hours.
Your motherboard or laptop must provide an M.2 2280 slot keyed for NVMe PCIe 3.0 x4 operation. Verify the firmware supports NVMe 1.3 boot if you plan to use this as the primary OS drive. Confirm the physical clearance allows a single-sided 4.00mm module. Older platforms limited to SATA or PCIe 2.0 will not achieve the stated speeds.
The drive operates between 0°C and 70°C and stores safely from -40°C to 85°C. Low power consumption helps extend battery life in laptops and keeps heat output minimal. With no moving parts the drive runs silently. Typical workloads stay well within the thermal envelope without active cooling.
| Brand | PNY |
|---|---|
| Series | CS1030 |
| Model | M280CS1030-500-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2000 MBps |
| Max Sequential Write | Up to 1100 MBps |
| MTBF | 2,000,000 hours |
| Features | Sequential Read of up to 2,000 MB/s and Write of up to 1,100 MB/s Faster boot up and quicker application launch Better overall system performance Highly durable, with not moving parts and can withstand extreme environments Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Forsendelsesvægt | 0.03 kg |
| Pakkestørrelse | 148 × 100 × 16 mm |
Andre versioner af denne model
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
The drive is supplied as a bare M.2 2280 module; no heatsink or mounting screw is included.
The 500GB model delivers up to 2000 MB/s read and 1100 MB/s write; larger capacities in the same series typically offer higher sustained write performance.
Yes, the drive is rated for up to 2000 MB/s sequential read and 1100 MB/s sequential write over a PCIe 3.0 x4 NVMe 1.3 link.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?