SanDisk Optimus 5100 1TB M.2 2280 internal SSD SDSP51100TAN-000E0
- Internal Solid Stat…
- M.2 2280
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
SanDisk
2TB M.2 2280 internal SSD with PCI-Express 4.0 x4 NVMe interface delivering up to 7100 MBps read and 6700 MBps write speeds
The SanDisk Optimus 5100 is a 2TB internal solid state drive built on the M.2 2280 form factor. It uses a PCI-Express 4.0 x4 interface with the NVMe protocol. The drive employs QLC 3D CBA NAND memory components. It is designed for desktop and laptop users who need high-capacity storage for operating systems, applications and large media libraries.
The drive delivers a maximum sequential write speed of up to 6700 MBps and a 4KB random write rating of up to 1,300,000 IOPS. Under heavy continuous workloads the QLC architecture writes directly to the flash after any SLC cache is filled. The 900TB terabytes written rating and 1,750,000 hours MTBF indicate the endurance ceiling for long-term write-heavy usage scenarios.
The drive operates without a heatsink and has an idle power draw of 4 mW. Average active power consumption is 4.1W for both read and write operations. The operating temperature range spans 0°C to 85°C. With no moving parts the drive produces no acoustic noise during operation.
| Brand | SanDisk |
|---|---|
| Series | Optimus 5100 |
| Model | SDSP51200TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | QLC 3D CBA NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 7100 MBps |
| Max Sequential Write | Up to 6700 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 1,300,000 IOPS |
| Terabytes Written (TBW) | 900TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 4 mW |
| Power Consumption (Active) | Average Active Power Read: 4.1W Average Active Power Write: 4.1W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 5.7g |
| Szállítási súly | 0.05 kg |
| Csomagméret | 127 × 102 × 23 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Average active power is 4.1W for both read and write operations, while idle power drops to 4 mW.
The drive uses a PCI-Express 4.0 x4 interface with NVMe protocol and requires an M.2 2280 key-M slot.
It fits the standard M.2 2280 form factor at 2.38 mm height and will operate at PCIe 3.0 speeds in a 3.0 slot.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?