Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Silverstone
Low-profile Intel LGA1156/1155/1150 cooler with 80 mm PWM fan, copper centre and extruded aluminium fins, 23 mm tall, 65 W TDP
The Silverstone Nitrogon SST-NT07-115X is an 80mm PWM low-profile air cooler built for Intel LGA1156, LGA1155 and LGA1150 processors with a 65W TDP limit. Its 23mm total height suits slim chassis where standard tower coolers cannot fit. The copper centre and extruded aluminium fins handle modest thermal loads in small-form-factor builds.
The cooler uses a push-pin clip that engages the stock Intel mounting holes, so installation requires no tools or backplate access. The 80mm x 10mm fan connects via a standard 4-pin PWM header for automatic speed control. Builders should verify case clearance above the socket, as the 90mm square footprint can interfere with tall memory modules or VRM heatsinks on some boards.
Rated for 65W TDP, this cooler is not intended for higher-power CPUs or overclocked operation. The fan spins between 2000 and 3600 RPM, delivering 15.6 to 28.1 CFM at 21.9 to 34.7 dBA. The PWM curve starts at 9V, so very low-speed silent running is limited. Systems needing more headroom or quieter idle noise will require a larger cooler or a case with better airflow.
| Brand | SILVERSTONE |
|---|---|
| Series | Nitrogon |
| Model | SST-NT07-115X |
| Type | Fan only |
| Fan Size | 80mm |
| RPM | 2000 - 3600 RPM |
| Air Flow | 15.6 ~ 28.1 CFM |
| Noise Level | 21.9 ~ 34.7 dBA |
| Heatsink Material | Copper center, Extruded aluminum fins |
| Fan Dimensions | 80 mm x 10 mm x 80 mm |
| Heatsink Dimensions | 90 mm x 23 mm x 90 mm (with Fan) |
| Weight | 180.3 g (with fan & clip) |
| Features | Cooling fan : 80mm PWM Max air pressure: 0.8 - 2.6 mmH2O CPU TDP : 65W Start Voltage (V): 9V Life Expectance (hrs): 30,000 hours Supports Intel LGA1156/1155/1150 processors Designed for low profile systems at only 23mm tall Large, custom 80mm PWM fan for excellent cooling and low noise Copper center and base with extruded aluminum fins Easy to install |
Listen for the 80 mm PWM fan spinning between 2000 and 3600 RPM and verify CPU temperatures stay within safe limits for a 65 W TDP processor.
The package includes the copper-centre heatsink with pre-mounted 80 mm PWM fan and the Intel LGA1156/1155/1150 mounting clip; thermal paste is not included.
This single SST-NT07-115X model supports LGA1156, LGA1155 and LGA1150 sockets and fits cases with 23 mm clearance.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?