Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Silverstone
Low-profile Intel LGA1156/1155/1150 cooler with 80 mm PWM fan, copper centre and extruded aluminium fins, 23 mm tall, 65 W TDP
The Silverstone Nitrogon SST-NT07-115X is an 80mm PWM low-profile air cooler built for Intel LGA1156, LGA1155 and LGA1150 processors with a 65W TDP limit. Its 23mm total height suits slim chassis where standard tower coolers cannot fit. The copper centre and extruded aluminium fins handle modest thermal loads in small-form-factor builds.
The cooler uses a push-pin clip that engages the stock Intel mounting holes, so installation requires no tools or backplate access. The 80mm x 10mm fan connects via a standard 4-pin PWM header for automatic speed control. Builders should verify case clearance above the socket, as the 90mm square footprint can interfere with tall memory modules or VRM heatsinks on some boards.
Rated for 65W TDP, this cooler is not intended for higher-power CPUs or overclocked operation. The fan spins between 2000 and 3600 RPM, delivering 15.6 to 28.1 CFM at 21.9 to 34.7 dBA. The PWM curve starts at 9V, so very low-speed silent running is limited. Systems needing more headroom or quieter idle noise will require a larger cooler or a case with better airflow.
| Brand | SILVERSTONE |
|---|---|
| Series | Nitrogon |
| Model | SST-NT07-115X |
| Type | Fan only |
| Fan Size | 80mm |
| RPM | 2000 - 3600 RPM |
| Air Flow | 15.6 ~ 28.1 CFM |
| Noise Level | 21.9 ~ 34.7 dBA |
| Heatsink Material | Copper center, Extruded aluminum fins |
| Fan Dimensions | 80 mm x 10 mm x 80 mm |
| Heatsink Dimensions | 90 mm x 23 mm x 90 mm (with Fan) |
| Weight | 180.3 g (with fan & clip) |
| Features | Cooling fan : 80mm PWM Max air pressure: 0.8 - 2.6 mmH2O CPU TDP : 65W Start Voltage (V): 9V Life Expectance (hrs): 30,000 hours Supports Intel LGA1156/1155/1150 processors Designed for low profile systems at only 23mm tall Large, custom 80mm PWM fan for excellent cooling and low noise Copper center and base with extruded aluminum fins Easy to install |
Listen for the 80 mm PWM fan spinning between 2000 and 3600 RPM and verify CPU temperatures stay within safe limits for a 65 W TDP processor.
The package includes the copper-centre heatsink with pre-mounted 80 mm PWM fan and the Intel LGA1156/1155/1150 mounting clip; thermal paste is not included.
This single SST-NT07-115X model supports LGA1156, LGA1155 and LGA1150 sockets and fits cases with 23 mm clearance.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?