Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
Silverstone
Low-profile Intel LGA1156/1155/1150 cooler with 80 mm PWM fan, copper centre and extruded aluminium fins, 23 mm tall, 65 W TDP
The Silverstone Nitrogon SST-NT07-115X is an 80mm PWM low-profile air cooler built for Intel LGA1156, LGA1155 and LGA1150 processors with a 65W TDP limit. Its 23mm total height suits slim chassis where standard tower coolers cannot fit. The copper centre and extruded aluminium fins handle modest thermal loads in small-form-factor builds.
The cooler uses a push-pin clip that engages the stock Intel mounting holes, so installation requires no tools or backplate access. The 80mm x 10mm fan connects via a standard 4-pin PWM header for automatic speed control. Builders should verify case clearance above the socket, as the 90mm square footprint can interfere with tall memory modules or VRM heatsinks on some boards.
Rated for 65W TDP, this cooler is not intended for higher-power CPUs or overclocked operation. The fan spins between 2000 and 3600 RPM, delivering 15.6 to 28.1 CFM at 21.9 to 34.7 dBA. The PWM curve starts at 9V, so very low-speed silent running is limited. Systems needing more headroom or quieter idle noise will require a larger cooler or a case with better airflow.
| Brand | SILVERSTONE |
|---|---|
| Series | Nitrogon |
| Model | SST-NT07-115X |
| Type | Fan only |
| Fan Size | 80mm |
| RPM | 2000 - 3600 RPM |
| Air Flow | 15.6 ~ 28.1 CFM |
| Noise Level | 21.9 ~ 34.7 dBA |
| Heatsink Material | Copper center, Extruded aluminum fins |
| Fan Dimensions | 80 mm x 10 mm x 80 mm |
| Heatsink Dimensions | 90 mm x 23 mm x 90 mm (with Fan) |
| Weight | 180.3 g (with fan & clip) |
| Features | Cooling fan : 80mm PWM Max air pressure: 0.8 - 2.6 mmH2O CPU TDP : 65W Start Voltage (V): 9V Life Expectance (hrs): 30,000 hours Supports Intel LGA1156/1155/1150 processors Designed for low profile systems at only 23mm tall Large, custom 80mm PWM fan for excellent cooling and low noise Copper center and base with extruded aluminum fins Easy to install |
Listen for the 80 mm PWM fan spinning between 2000 and 3600 RPM and verify CPU temperatures stay within safe limits for a 65 W TDP processor.
The package includes the copper-centre heatsink with pre-mounted 80 mm PWM fan and the Intel LGA1156/1155/1150 mounting clip; thermal paste is not included.
This single SST-NT07-115X model supports LGA1156, LGA1155 and LGA1150 sockets and fits cases with 23 mm clearance.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?