STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
STARTECH
Mounts two 2.5" SATA SSDs or HDDs into one 3.5" bay with steel construction and included cables
Model 2 x 2.5in (SATA)
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
Option 1 x 3.5in
The StarTech BRACKET25X2 is a black steel conversion tray that lets you install two 2.5in SATA SSDs or hard drives into a single 3.5in drive bay. It ships with a SATA power Y-cable and two SATA data cables so both drives can be connected immediately. This bracket suits anyone upgrading a desktop that has a spare 3.5in bay but wants the speed or capacity of 2.5in SATA storage.
The kit fits any desktop chassis with an available 3.5in mounting bay and accepts standard 2.5in SATA drives such as the Samsung 840 EVO or Crucial MX 100 series. It does not suit systems that lack a 3.5in bay or drives that use interfaces other than SATA. Builders needing to mount more than two drives or requiring tool-less installation should look at alternative solutions.
The single specification that decides fit is the dual 2.5in to 3.5in conversion ratio: exactly two SATA drives occupy one standard 3.5in slot. Verify your case has a free 3.5in bay and that both drives use the SATA interface before purchasing.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET25X2 |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Specifications | Interface: SATA Connector Type(s): RJ-45 Enclosure Type: Steel Package: 1 x Dual 2.5" Mounting Bracket 1 x SATA Power Y cable 2 x SATA DATA Cable |
| Features | Mount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay Compatible with desktop computers with an available 3.5in mounting bay and 2.5in hard drives and solid state drive such as Samsung 840 EVO series & Crucial MX 100 series Hard Drive Mounting Bracket / 2.5 to 3.5 Hard Drive Adapter / 2.5 to 3.5 Bracket / SSD Mounting Bracket / Hard Drive Mounting Brackets / Hard Drive Mounting Kit / SSD Mounting Kit Add the performance of 2.5in solid state drives to your desktop computer |
| Szállítási súly | 0.18 kg |
| Csomagméret | 170 × 145 × 43 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The bracket holds two 2.5-inch SATA SSDs or HDDs inside a single 3.5-inch drive bay.
The supplied SATA power Y-cable and two SATA data cables connect drives over the SATA interface, which is limited to SATA III 6 Gb/s.
It fits a standard 3.5-inch desktop drive bay and uses the bay's screw holes to secure the steel tray.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?