Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black steel bracket holding two 2.5 inch drives in a 3.5 inch bay with SATA cables

STARTECH

STARTECH BRACKET25X2 Dual 2.5" to 3.5" HDD SSD Mounting Bracket hdd accessory

SKU CH-15M7-2CQ4V MPN BRACKET25X2

Mounts two 2.5" SATA SSDs or HDDs into one 3.5" bay with steel construction and included cables

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • SpecificationsInterface: SATA Connector Type(s): RJ-45 Enclosure Type: Ste
  • FeaturesMount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay

Model 2 x 2.5in (SATA)

Přeškrtnuté varianty existují, ale zde nejsou skladem.

Option 1 x 3.5in

  • Mount two 2.5" SATA drives in one 3.5" bay with the included bracket
  • Add 2.5" SSD performance to a desktop using the supplied SATA data cables
  • Power both drives from a single connector via the bundled SATA power Y cable
  • Steel enclosure protects the installed drives inside the chassis
  • Works with 2.5" SATA HDDs and SSDs such as Samsung 840 EVO and Crucial MX 100

Dual 2.5" to 3.5" SATA Drive Mounting Bracket

The StarTech BRACKET25X2 is a black steel conversion tray that lets you install two 2.5in SATA SSDs or hard drives into a single 3.5in drive bay. It ships with a SATA power Y-cable and two SATA data cables so both drives can be connected immediately. This bracket suits anyone upgrading a desktop that has a spare 3.5in bay but wants the speed or capacity of 2.5in SATA storage.

Desktop builders adding SATA SSDs

The kit fits any desktop chassis with an available 3.5in mounting bay and accepts standard 2.5in SATA drives such as the Samsung 840 EVO or Crucial MX 100 series. It does not suit systems that lack a 3.5in bay or drives that use interfaces other than SATA. Builders needing to mount more than two drives or requiring tool-less installation should look at alternative solutions.

Two-drive capacity in one 3.5in bay

The single specification that decides fit is the dual 2.5in to 3.5in conversion ratio: exactly two SATA drives occupy one standard 3.5in slot. Verify your case has a free 3.5in bay and that both drives use the SATA interface before purchasing.

Přednosti

  • Mount two 2.5" SATA drives in one 3.5" bay with the included bracket
  • Add 2.5" SSD performance to a desktop using the supplied SATA data cables
  • Power both drives from a single connector via the bundled SATA power Y cable
  • Steel enclosure protects the installed drives inside the chassis
  • Works with 2.5" SATA HDDs and SSDs such as Samsung 840 EVO and Crucial MX 100

Specifikace

BrandStarTech.com
ModelBRACKET25X2
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
SpecificationsInterface: SATA
Connector Type(s): RJ-45
Enclosure Type: Steel
Package:
1 x Dual 2.5" Mounting Bracket
1 x SATA Power Y cable
2 x SATA DATA Cable
FeaturesMount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay
Compatible with desktop computers with an available 3.5in mounting bay and 2.5in hard drives and solid state drive such as Samsung 840 EVO series & Crucial MX 100 series
Hard Drive Mounting Bracket / 2.5 to 3.5 Hard Drive Adapter / 2.5 to 3.5 Bracket / SSD Mounting Bracket / Hard Drive Mounting Brackets / Hard Drive Mounting Kit / SSD Mounting Kit
Add the performance of 2.5in solid state drives to your desktop computer
Přepravní hmotnost0.18 kg
Rozměry balení170 × 145 × 43 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How many 2.5-inch drives can I install in one 3.5-inch bay with this bracket?

The bracket holds two 2.5-inch SATA SSDs or HDDs inside a single 3.5-inch drive bay.

What interface do the included cables use and what speed does it cap at?

The supplied SATA power Y-cable and two SATA data cables connect drives over the SATA interface, which is limited to SATA III 6 Gb/s.

What physical space and mounting points does this bracket need?

It fits a standard 3.5-inch desktop drive bay and uses the bay's screw holes to secure the steel tray.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.