Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

STARTECH

STARTECH BRACKET225PT Dual 2.5" to 3.5" HDD/SSD Mounting Bracket

SKU CH-J9EF-0EP5Z MPN BRACKET225PT

Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model 2 x 2.5in (Tool-less)

Přeškrtnuté varianty existují, ale zde nejsou skladem.

Option 1 x 3.5in

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

Dual 2.5″ to 3.5″ drive bracket

The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.

SATA I/II/III interface limits

Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.

Check bay clearance and drive height

Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.

Přednosti

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

Specifikace

BrandStarTech.com
ModelBRACKET225PT
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsCompatible Drive Types (Type and Rate): SATA & IDE
Drive Installation: Fixed
Drive Size: 2.5in
Number of 2.5 inch bays 2
Supported Drive Height(s):
5mm
7mm
9.5mm
12.5mm
FeaturesInstall two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer
Tool-free 2-drive adapter bracket
2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter
Supports 2.5in drives 5mm to 12.5 mm in height
SATA I/II/III
Přepravní hmotnost0.09 kg
Rozměry balení142 × 107 × 36 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the single or dual version of this bracket?

The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.

What does the tool-less design mean when I fit it in my PC?

You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.

The bracket lists SATA I/II/III — what speed will my drives actually run at?

The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.