STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
STARTECH
Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation
Model 2 x 2.5in (Tool-less)
Preškrtnuté verzie existujú, ale nie sú tu skladom.
Option 1 x 3.5in
The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.
Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.
Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET225PT |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | Multi 2.5" Drives to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" |
| Specifications | Compatible Drive Types (Type and Rate): SATA & IDE Drive Installation: Fixed Drive Size: 2.5in Number of 2.5 inch bays 2 Supported Drive Height(s): 5mm 7mm 9.5mm 12.5mm |
| Features | Install two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer Tool-free 2-drive adapter bracket 2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter Supports 2.5in drives 5mm to 12.5 mm in height SATA I/II/III |
| Prepravná hmotnosť | 0.09 kg |
| Rozmery balenia | 142 × 107 × 36 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.
You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.
The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?