STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
STARTECH
Mounts two 2.5" SATA SSDs or HDDs into one 3.5" bay with steel construction and included cables
Model 2 x 2.5in (SATA)
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Option 1 x 3.5in
The StarTech BRACKET25X2 is a black steel conversion tray that lets you install two 2.5in SATA SSDs or hard drives into a single 3.5in drive bay. It ships with a SATA power Y-cable and two SATA data cables so both drives can be connected immediately. This bracket suits anyone upgrading a desktop that has a spare 3.5in bay but wants the speed or capacity of 2.5in SATA storage.
The kit fits any desktop chassis with an available 3.5in mounting bay and accepts standard 2.5in SATA drives such as the Samsung 840 EVO or Crucial MX 100 series. It does not suit systems that lack a 3.5in bay or drives that use interfaces other than SATA. Builders needing to mount more than two drives or requiring tool-less installation should look at alternative solutions.
The single specification that decides fit is the dual 2.5in to 3.5in conversion ratio: exactly two SATA drives occupy one standard 3.5in slot. Verify your case has a free 3.5in bay and that both drives use the SATA interface before purchasing.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET25X2 |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Specifications | Interface: SATA Connector Type(s): RJ-45 Enclosure Type: Steel Package: 1 x Dual 2.5" Mounting Bracket 1 x SATA Power Y cable 2 x SATA DATA Cable |
| Features | Mount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay Compatible with desktop computers with an available 3.5in mounting bay and 2.5in hard drives and solid state drive such as Samsung 840 EVO series & Crucial MX 100 series Hard Drive Mounting Bracket / 2.5 to 3.5 Hard Drive Adapter / 2.5 to 3.5 Bracket / SSD Mounting Bracket / Hard Drive Mounting Brackets / Hard Drive Mounting Kit / SSD Mounting Kit Add the performance of 2.5in solid state drives to your desktop computer |
| Lähetyspaino | 0.18 kg |
| Pakkauksen mitat | 170 × 145 × 43 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The bracket holds two 2.5-inch SATA SSDs or HDDs inside a single 3.5-inch drive bay.
The supplied SATA power Y-cable and two SATA data cables connect drives over the SATA interface, which is limited to SATA III 6 Gb/s.
It fits a standard 3.5-inch desktop drive bay and uses the bay's screw holes to secure the steel tray.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?