Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black metal bracket converting a 3.5 inch drive to fit a 5.25 inch bay

STARTECH

STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory

SKU CH-YVDH-0N6HA

Mounts a 3.5" drive in a 5.25" bay with all-metal brackets and included screws

  • ColorBlack
  • Conversion Tray1 x 3.5" Drive to 5.25" Bay
  • FeaturesThe 3.5 inch to 5.25 inch adapter brackets allow 3.5 inch dr

Model 1 x 3.5in

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option 1 x 5.25in

  • Mount 3.5" drives in 5.25" bays for flexible case layouts
  • All-metal brackets deliver rigid support for heavy hard drives
  • Includes both #6-32 and M3 screws for universal compatibility
  • RoHS, REACH and TAA compliant for regulated environments
  • Backed by a two-year manufacturer warranty

Drive Mounting Kit

This metal bracket kit lets you install a 3.5in hard drive into a standard 5.25in drive bay. It supports IDE, SCSI or SCA drives and includes two brackets with both #6-32 and M3 mounting screws. The all-metal construction is RoHS and REACH compliant.

Upgrade Path

It replaces improvised mounting methods when a case lacks native 3.5in bays. The jump is worth it when you need a secure, vibration-resistant fit for a mechanical drive in a larger bay. Builders who need to stack multiple drives in a single 5.25in slot will need a different solution.

Compatibility Check

Verify your case has a free 5.25in half-height bay with at least 1.2in of vertical clearance. Confirm the drive uses a standard 3.5in form factor and that your mounting holes match the supplied #6-32 or M3 threads. No tool-less rails or proprietary screw patterns are supported.

Kohokohdat

  • Mount 3.5" drives in 5.25" bays for flexible case layouts
  • All-metal brackets deliver rigid support for heavy hard drives
  • Includes both #6-32 and M3 screws for universal compatibility
  • RoHS, REACH and TAA compliant for regulated environments
  • Backed by a two-year manufacturer warranty

Tekniset tiedot

BrandStarTech.com
ModelBRACKET
ColorBlack
Conversion Tray1 x 3.5" Drive to 5.25" Bay
FeaturesThe 3.5 inch to 5.25 inch adapter brackets allow 3.5 inch drives hard drives to be mounted in standard 5.25 inch drive bays. It works with IDE, SCSI, or SCA drives.
It works with IDE, SCSI, or SCA drives.
Durable all metal construction for mounting any type of 3.5in device into a 5.25in bay.
Lähetyspaino0.07 kg
Pakkauksen mitat113 × 85 × 30 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 1.2-inch height and 3.5-inch length fit my case's 5.25-inch bay?

The bracket measures 1.2 inches high by 3.5 inches long and is designed to mount a 3.5-inch drive in a standard 5.25-inch bay, so it fits the bay opening.

Which of the included #6-32 or M3 screws secure the bracket to the bay, and which secure the drive to the bracket?

Use the four #6-32 screws to fasten the bracket into the 5.25-inch bay threads, then use the four M3 screws to attach your 3.5-inch drive to the bracket.

Does the all-metal construction mean I will never need to replace the bracket itself?

The metal brackets are durable and RoHS/REACH compliant, but if the screw threads strip or the brackets bend during a rebuild, you would replace the kit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.