SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Syba
Adds five SATA 6.0Gb/s ports through an M.2 B+M key slot using PCIe 3.0 x2 bandwidth up to 1700 MB/s
This adapter connects five SATA 6.0 Gb/s drives through a single PCIe 3.0 x2 M.2 slot. It is aimed at builders who need extra internal storage connections without occupying a full-length expansion slot. The card operates as a non-RAID controller and cannot be used to boot an operating system.
The board has no fan or active cooling components, so it adds zero acoustic output to the system. Power draw is limited to the PCIe 3.0 x2 interface and the attached SATA devices. Plug-and-play operation means no driver installation is required for basic functionality.
Under continuous load the two-lane PCIe 3.0 link caps aggregate bandwidth at 1700 MB/s across all five ports. Port multiplier support is available for non-RAID configurations, but the adapter is designed for storage use only and will not serve as a boot device.
| Brand | SYBA |
|---|---|
| Model | SI-ADA40141 |
| Type | SATA III (6.0Gb/s) |
| Internal Connectors | 5 x SATA 6.0Gb/s |
| Interface | PCI-Express 3.0 x2 |
| Features | Connect five SATA drives to a M.2 B+M Key Connection, providing up to 1700 MB/s speed. Plug and play supported, no additional software installation or setting required. Can support Port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives and solid state drives and computer systems with SATA controllers. 2-Lane M.2 PCI-Express 3.0 interface (B and M Key). Complies with PCI Express Base Specification Revision 3.1a. This card is only design for storage use only, can not boot any OS / System drives. |
| Package Contents | 1 x 5 Port SATA Controller to M.2 Slot 5 x SATA Cables 1 x Manaul |
| Szállítási súly | 0.15 kg |
| Csomagméret | 178 × 152 × 51 mm |
Insert the card into a compatible M.2 B+M Key slot at PCIe 3.0 x2, secure it with the motherboard standoff screw, then connect up to five SATA drives using the supplied cables; the step often missed is enabling the M.2 slot in BIOS for PCIe storage rather than leaving it in default or disabled mode.
The adapter itself has no moving parts and requires no scheduled maintenance; only the attached SATA drives or cables may need replacement if they fail or degrade.
The PCIe 3.0 x2 host link caps aggregate bandwidth at 1700 MB/s, so combined drive traffic cannot exceed that ceiling regardless of individual SATA 6.0Gb/s port speed.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?