SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Syba
Adds five SATA 6.0Gb/s ports through an M.2 B+M key slot using PCIe 3.0 x2 bandwidth up to 1700 MB/s
This adapter connects five SATA 6.0 Gb/s drives through a single PCIe 3.0 x2 M.2 slot. It is aimed at builders who need extra internal storage connections without occupying a full-length expansion slot. The card operates as a non-RAID controller and cannot be used to boot an operating system.
The board has no fan or active cooling components, so it adds zero acoustic output to the system. Power draw is limited to the PCIe 3.0 x2 interface and the attached SATA devices. Plug-and-play operation means no driver installation is required for basic functionality.
Under continuous load the two-lane PCIe 3.0 link caps aggregate bandwidth at 1700 MB/s across all five ports. Port multiplier support is available for non-RAID configurations, but the adapter is designed for storage use only and will not serve as a boot device.
| Brand | SYBA |
|---|---|
| Model | SI-ADA40141 |
| Type | SATA III (6.0Gb/s) |
| Internal Connectors | 5 x SATA 6.0Gb/s |
| Interface | PCI-Express 3.0 x2 |
| Features | Connect five SATA drives to a M.2 B+M Key Connection, providing up to 1700 MB/s speed. Plug and play supported, no additional software installation or setting required. Can support Port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives and solid state drives and computer systems with SATA controllers. 2-Lane M.2 PCI-Express 3.0 interface (B and M Key). Complies with PCI Express Base Specification Revision 3.1a. This card is only design for storage use only, can not boot any OS / System drives. |
| Package Contents | 1 x 5 Port SATA Controller to M.2 Slot 5 x SATA Cables 1 x Manaul |
| Sūtījuma svars | 0.15 kg |
| Sūtījuma izmēri | 178 × 152 × 51 mm |
Insert the card into a compatible M.2 B+M Key slot at PCIe 3.0 x2, secure it with the motherboard standoff screw, then connect up to five SATA drives using the supplied cables; the step often missed is enabling the M.2 slot in BIOS for PCIe storage rather than leaving it in default or disabled mode.
The adapter itself has no moving parts and requires no scheduled maintenance; only the attached SATA drives or cables may need replacement if they fail or degrade.
The PCIe 3.0 x2 host link caps aggregate bandwidth at 1700 MB/s, so combined drive traffic cannot exceed that ceiling regardless of individual SATA 6.0Gb/s port speed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?