Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
A loose coil of gray PLA filament 1.75mm diameter 10m length in clear bag

Unique-Bargains

Unique-Bargains 3D Printer Filament PLA 1.75mm 10m Gray

SKU CH-W1XN-XDA77

10 metres of 1.75 mm PLA filament with ±0.02 mm accuracy for smooth, warp-free prints

  • TypeTubes
  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

PLA filament for 1.75 mm printers

This 10 m spool of gray PLA suits hobbyists and educators who need a small amount of material for test prints or calibration. The filament is made from renewable resources and contains no hazardous substances. Dimensional accuracy is held to ±0.03 mm for consistent extrusion.

Replaces partially used spools or trial packs

A 10 m length lets you verify a new profile or colour without committing to a full kilogram roll. The jump is worth it when you want low shrinkage and minimal warping on a printer that does not have a heated bed. The 34 g net weight keeps shipping light.

Fits any 1.75 mm direct-drive or Bowden system

No special hot-end or enclosure is required; the material prints at standard PLA temperatures. The tight ±0.02 mm tolerance reduces the risk of nozzle clogging and frees you from frequent filament checks. Gray colour provides neutral contrast for painted finishes.

Erősségek

  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

Műszaki adatok

BrandUnique Bargains
TypeTubes

Kérdések a termékről

Will the 1.75mm diameter with +/- 0.03mm accuracy fit my printer's filament path?

The filament is manufactured to 1.75mm with a tolerance of +/- 0.03mm, matching the standard 1.75mm specification used by most desktop 3D printers.

How do I load this 10m PLA spool without the filament snapping or tangling?

Feed the free end straight into the extruder inlet while keeping the coil under slight tension; the most common mistake is letting the loose coil spring back and create a kink that jams the drive gear.

When will this 34g PLA sample run out and need a replacement spool?

At 10 metres long and 34 grams net weight, the filament will last for a few small test prints or calibration models before a full 1 kg spool is required.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.