Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A loose coil of gray PLA filament 1.75mm diameter 10m length in clear bag

Unique-Bargains

Unique-Bargains 3D Printer Filament PLA 1.75mm 10m Gray

SKU CH-W1XN-XDA77

10 metres of 1.75 mm PLA filament with ±0.02 mm accuracy for smooth, warp-free prints

  • TypeTubes
  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

PLA filament for 1.75 mm printers

This 10 m spool of gray PLA suits hobbyists and educators who need a small amount of material for test prints or calibration. The filament is made from renewable resources and contains no hazardous substances. Dimensional accuracy is held to ±0.03 mm for consistent extrusion.

Replaces partially used spools or trial packs

A 10 m length lets you verify a new profile or colour without committing to a full kilogram roll. The jump is worth it when you want low shrinkage and minimal warping on a printer that does not have a heated bed. The 34 g net weight keeps shipping light.

Fits any 1.75 mm direct-drive or Bowden system

No special hot-end or enclosure is required; the material prints at standard PLA temperatures. The tight ±0.02 mm tolerance reduces the risk of nozzle clogging and frees you from frequent filament checks. Gray colour provides neutral contrast for painted finishes.

Kohokohdat

  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

Tekniset tiedot

BrandUnique Bargains
TypeTubes

Kysymyksiä tästä tuotteesta

Will the 1.75mm diameter with +/- 0.03mm accuracy fit my printer's filament path?

The filament is manufactured to 1.75mm with a tolerance of +/- 0.03mm, matching the standard 1.75mm specification used by most desktop 3D printers.

How do I load this 10m PLA spool without the filament snapping or tangling?

Feed the free end straight into the extruder inlet while keeping the coil under slight tension; the most common mistake is letting the loose coil spring back and create a kink that jams the drive gear.

When will this 34g PLA sample run out and need a replacement spool?

At 10 metres long and 34 grams net weight, the filament will last for a few small test prints or calibration models before a full 1 kg spool is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.