Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A loose coil of gray PLA filament 1.75mm diameter 10m length in clear bag

Unique-Bargains

Unique-Bargains 3D Printer Filament PLA 1.75mm 10m Gray

SKU CH-W1XN-XDA77

10 metres of 1.75 mm PLA filament with ±0.02 mm accuracy for smooth, warp-free prints

  • TypeTubes
  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

PLA filament for 1.75 mm printers

This 10 m spool of gray PLA suits hobbyists and educators who need a small amount of material for test prints or calibration. The filament is made from renewable resources and contains no hazardous substances. Dimensional accuracy is held to ±0.03 mm for consistent extrusion.

Replaces partially used spools or trial packs

A 10 m length lets you verify a new profile or colour without committing to a full kilogram roll. The jump is worth it when you want low shrinkage and minimal warping on a printer that does not have a heated bed. The 34 g net weight keeps shipping light.

Fits any 1.75 mm direct-drive or Bowden system

No special hot-end or enclosure is required; the material prints at standard PLA temperatures. The tight ±0.02 mm tolerance reduces the risk of nozzle clogging and frees you from frequent filament checks. Gray colour provides neutral contrast for painted finishes.

Pluspunten

  • Stable extrusion from high-purity PLA base material
  • Smooth prints without bubbles, blistering or stringing
  • Consistent 1.75 mm diameter held to ±0.02 mm tolerance
  • Warp-free, low-shrink performance with strong layer adhesion
  • Renewable plant-based filament free from hazardous substances

Specificaties

BrandUnique Bargains
TypeTubes

Vragen over dit artikel

Will the 1.75mm diameter with +/- 0.03mm accuracy fit my printer's filament path?

The filament is manufactured to 1.75mm with a tolerance of +/- 0.03mm, matching the standard 1.75mm specification used by most desktop 3D printers.

How do I load this 10m PLA spool without the filament snapping or tangling?

Feed the free end straight into the extruder inlet while keeping the coil under slight tension; the most common mistake is letting the loose coil spring back and create a kink that jams the drive gear.

When will this 34g PLA sample run out and need a replacement spool?

At 10 metres long and 34 grams net weight, the filament will last for a few small test prints or calibration models before a full 1 kg spool is required.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.