Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

10Gtek

10Gtek X520-DA1 10Gb PCIe 2.0 x8 SFP+ network card

SKU CH-9K1C-9SQ45

Adds a single 10 Gbps SFP+ port via PCIe 2.0 x8 using an Intel 82599EN controller, compatible with Windows Server, Linux and VMware

  • StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
  • Speed10Gbps
  • Connectors1 x SFP+
  • InterfacePCI-Express
  • DriversIncluded
  • Temperature0°C ~ 55°C

Ports 1 x SFP

Yfirstrikaðar útgáfur eru til, en ekki til hér.

Option Compatible Intel X520-DA1

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 10 Gbps throughput over a single SFP+ port for high-speed networking
  • Intel 82599EN controller with I/O virtualization for stable server operation
  • PCIe 2.0 x8 interface fits both x8 and x16 slots for flexible installation
  • Broad OS support including Windows Server, Linux and VMware ESXi
  • Low-profile bracket included for small form-factor and server chassis

Single-port 10 GbE adapter for servers

This 10Gtek card puts a single SFP+ port on a PCIe 2.0 x8 lane using the Intel 82599EN controller. It targets administrators who need 10 Gbps fibre or direct-attach links in rack-mount or low-profile chassis. Driver media and both full-height and low-profile brackets are included. The card does not support hot-swap insertion.

Throughput headroom at 10 Gbps line rate

The SFP+ cage accepts 10 Gbps modules, DAC or AOC cables, delivering full-duplex 10 Gbps bandwidth. Jumbo frames up to 9.5 KB reduce CPU overhead for iSCSI, FCoE or NFS storage traffic. A single port means aggregate throughput tops out at 10 Gbps; multi-port link aggregation or 25 Gbps uplinks require additional cards.

Standard operating envelope 0 °C to 55 °C

The Intel 82599EN controller is rated for continuous operation between 0 °C and 55 °C without exotic cooling. Passive heatsink dissipation keeps acoustic impact negligible in typical server airflow. Power draw is limited to the PCIe 2.0 x8 slot envelope, so no auxiliary power connector is needed.

Helstu kostir

  • 10 Gbps throughput over a single SFP+ port for high-speed networking
  • Intel 82599EN controller with I/O virtualization for stable server operation
  • PCIe 2.0 x8 interface fits both x8 and x16 slots for flexible installation
  • Broad OS support including Windows Server, Linux and VMware ESXi
  • Low-profile bracket included for small form-factor and server chassis

Tæknilýsing

Brand10Gtek
StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab
Speed10Gbps
Connectors1 x SFP+
InterfacePCI-Express
DriversIncluded
Temperature0°C ~ 55°C
FeaturesX520-DA1

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the PCIe 2.0 x8 card run in my older motherboard that only has PCIe x16 slots?

Yes, the PCIe 2.0 x8 interface fits both x8 and x16 slots and will operate at x8 speed in either slot.

How can I verify the 82599EN controller is recognised and the 10Gbps link is active after installing the driver?

Check Device Manager or lspci for the Intel 82599EN entry, confirm the SFP+ module shows a link light, and run a throughput test to see 10Gbps speeds.

Does the box include a transceiver or DAC cable for the SFP+ port, or must I buy one separately?

The package contains the adapter, a full-height bracket, a low-profile bracket and a driver CD; SFP+ modules, DAC or AOC cables are not included and must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.