Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3 240-pin ECC RDIMM modules in silver anti-static tray

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V server RAM

SKU CH-SV1Q-33S6K

16 GB dual-channel DDR3 1333 ECC registered server memory kit with 240-pin DIMMs at 1.5 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

DDR3 ECC RDIMM kit for servers

This 16GB dual-channel kit contains two 8GB registered DIMMs built for DDR3 servers and workstations that require ECC error correction. Each module runs at 1333 MHz with CL9 latency at the standard 1.5V voltage. The 2Rx4 dual-rank x4 organisation suits platforms designed for registered memory.

Installation notes and common issues

The 240-pin DIMMs install like standard server memory, but the system must explicitly support DDR3 registered ECC modules; desktop and laptop boards will not accept them. Confirm the motherboard manual for correct channel population order before seating the modules. Mismatched rank or voltage settings in the BIOS are the usual cause of a no-post condition.

Registered ECC requirement decides fit

The single specification that determines compatibility is the registered ECC RDIMM design; only systems qualified for DDR3 registered ECC memory can use this kit. Verify the platform’s supported memory list before purchase.

Helstu kostir

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I confirm the ECC RDIMM kit is running at 1333 MHz with CL9 after installation?

Enter the server BIOS or use a hardware-monitoring tool such as CPU-Z to verify the memory speed shows 1333 MHz and the timings read CL9 for each 8 GB module.

What comes in the box and what must I source separately?

The box contains two 8 GB DDR3 240-pin registered DIMMs; no cables, brackets or additional components are included and none are required for installation.

Should I choose the 2Rx4 dual-rank kit or a single-rank alternative for my DDR3 server?

Select this 2Rx4 dual-rank kit when your server's memory controller supports dual-rank registered DIMMs and you need 16 GB in a two-module configuration.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.