Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR3 240-pin ECC RDIMM modules in silver anti-static tray

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V server RAM

SKU CH-SV1Q-33S6K

16 GB dual-channel DDR3 1333 ECC registered server memory kit with 240-pin DIMMs at 1.5 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

DDR3 ECC RDIMM kit for servers

This 16GB dual-channel kit contains two 8GB registered DIMMs built for DDR3 servers and workstations that require ECC error correction. Each module runs at 1333 MHz with CL9 latency at the standard 1.5V voltage. The 2Rx4 dual-rank x4 organisation suits platforms designed for registered memory.

Installation notes and common issues

The 240-pin DIMMs install like standard server memory, but the system must explicitly support DDR3 registered ECC modules; desktop and laptop boards will not accept them. Confirm the motherboard manual for correct channel population order before seating the modules. Mismatched rank or voltage settings in the BIOS are the usual cause of a no-post condition.

Registered ECC requirement decides fit

The single specification that determines compatibility is the registered ECC RDIMM design; only systems qualified for DDR3 registered ECC memory can use this kit. Verify the platform’s supported memory list before purchase.

Høydepunkter

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

Spesifikasjoner

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How do I confirm the ECC RDIMM kit is running at 1333 MHz with CL9 after installation?

Enter the server BIOS or use a hardware-monitoring tool such as CPU-Z to verify the memory speed shows 1333 MHz and the timings read CL9 for each 8 GB module.

What comes in the box and what must I source separately?

The box contains two 8 GB DDR3 240-pin registered DIMMs; no cables, brackets or additional components are included and none are required for installation.

Should I choose the 2Rx4 dual-rank kit or a single-rank alternative for my DDR3 server?

Select this 2Rx4 dual-rank kit when your server's memory controller supports dual-rank registered DIMMs and you need 16 GB in a two-module configuration.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.