Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3 DIMMs with black chips, 240-pin

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333MHz 1.5V CL9 240-Pin Non-ECC UDIMM Desktop RAM

SKU CH-PHXR-Y8TE8

A 16GB dual-channel kit of DDR3 desktop memory running at 1333MHz with CL9 latency and 1.5V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • 5 V standard voltage keeps power draw predictable
  • CL9 latency supports responsive everyday performance
  • 240-pin non-ECC UDIMM fits compatible desktop slots

16GB DDR3 Kit for Desktop Upgrades

This 16GB kit contains two 8GB DDR3 modules that run at 1333MHz with a CL9 latency and 1.5V operating voltage. The 240-pin unbuffered non-ECC DIMMs are built for standard desktop memory slots. Dual-rank 2Rx8 organisation helps the memory controller interleave accesses for smoother multitasking.

Replaces Lower-Capacity or Slower DDR3 Modules

If a system currently has 4GB or 8GB of slower DDR3, adding this 16GB kit at the rated 1333MHz speed can reduce swapping and improve responsiveness in everyday workloads. The upgrade is most worthwhile when the motherboard and CPU officially support DDR3 1333 operation at 1.5V without manual configuration.

Limited by DDR3 Platform Maximum Bandwidth

The PC3-10600 interface caps theoretical throughput at the DDR3 1333 data rate, so performance cannot exceed what the memory controller and chipset allow. Older platforms may also restrict total addressable memory per slot or per channel, which can prevent the full 16GB from being recognised.

Helstu kostir

  • 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • 5 V standard voltage keeps power draw predictable
  • CL9 latency supports responsive everyday performance
  • 240-pin non-ECC UDIMM fits compatible desktop slots

Tæknilýsing

BrandA-Tech
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseSelect Compatible DDR3 Desktops

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 16 GB kit fit my desktop that uses DDR3 1333 MHz UDIMM slots?

Yes, the kit provides two 8 GB DDR3 modules rated at 1333 MHz, 1.5 V, CL9, 240-pin unbuffered non-ECC — the standard specification for compatible desktop DIMM slots.

My motherboard has four slots; can I install this kit alongside my existing 8 GB DDR3 modules?

You can add the two 8 GB modules to the free slots provided your board supports the same 1333 MHz, 1.5 V, non-ECC unbuffered DDR3 standard and total capacity limits are not exceeded.

Does the dual-rank 2Rx8 organisation affect compatibility with my system?

Dual-rank 2Rx8 modules are standard for 8 GB DDR3 DIMMs; most desktop chipsets that accept 8 GB sticks handle this organisation without issue.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.