Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333MHz 1.5V CL9 240-Pin Non-ECC UDIMM Desktop RAM

SKU CH-PHXR-Y8TE8

A 16GB dual-channel kit of DDR3 desktop memory running at 1333MHz with CL9 latency and 1.5V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • 5 V standard voltage keeps power draw predictable
  • CL9 latency supports responsive everyday performance
  • 240-pin non-ECC UDIMM fits compatible desktop slots

16GB DDR3 Kit for Desktop Upgrades

This 16GB kit contains two 8GB DDR3 modules that run at 1333MHz with a CL9 latency and 1.5V operating voltage. The 240-pin unbuffered non-ECC DIMMs are built for standard desktop memory slots. Dual-rank 2Rx8 organisation helps the memory controller interleave accesses for smoother multitasking.

Replaces Lower-Capacity or Slower DDR3 Modules

If a system currently has 4GB or 8GB of slower DDR3, adding this 16GB kit at the rated 1333MHz speed can reduce swapping and improve responsiveness in everyday workloads. The upgrade is most worthwhile when the motherboard and CPU officially support DDR3 1333 operation at 1.5V without manual configuration.

Limited by DDR3 Platform Maximum Bandwidth

The PC3-10600 interface caps theoretical throughput at the DDR3 1333 data rate, so performance cannot exceed what the memory controller and chipset allow. Older platforms may also restrict total addressable memory per slot or per channel, which can prevent the full 16GB from being recognised.

Puntos fuertes

  • 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed matches legacy platform specs
  • 5 V standard voltage keeps power draw predictable
  • CL9 latency supports responsive everyday performance
  • 240-pin non-ECC UDIMM fits compatible desktop slots

Especificaciones

BrandA-Tech
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseSelect Compatible DDR3 Desktops

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will this 16 GB kit fit my desktop that uses DDR3 1333 MHz UDIMM slots?

Yes, the kit provides two 8 GB DDR3 modules rated at 1333 MHz, 1.5 V, CL9, 240-pin unbuffered non-ECC — the standard specification for compatible desktop DIMM slots.

My motherboard has four slots; can I install this kit alongside my existing 8 GB DDR3 modules?

You can add the two 8 GB modules to the free slots provided your board supports the same 1333 MHz, 1.5 V, non-ECC unbuffered DDR3 standard and total capacity limits are not exceeded.

Does the dual-rank 2Rx8 organisation affect compatibility with my system?

Dual-rank 2Rx8 modules are standard for 8 GB DDR3 DIMMs; most desktop chipsets that accept 8 GB sticks handle this organisation without issue.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.