Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 ECC RDIMM module with black chips

A-Tech

A-Tech 64GB DDR4 2400 ECC RDIMM 2S2Rx4 Server Memory

SKU CH-1367-HMH9V

64 GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2 V operation for server workloads

  • Capacity64GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity handles heavy server workloads
  • DDR4 2400 MHz speed moves data quickly
  • ECC registered design corrects errors for reliability
  • CL17 latency at 1.2 V keeps efficiency high
  • 288-pin DIMM fits standard DDR4 server slots

Server-grade DDR4 ECC RDIMM

This 64 GB registered DIMM brings error-correcting DDR4 memory to servers and workstations that require data integrity under sustained loads. The module runs at 2400 MHz with CL17 latency and standard 1.2 V operation. It targets administrators upgrading compatible platforms that support registered ECC memory.

288-pin registered build with major-brand chips

The 2S2Rx4 (4Rx4) organization uses major-brand components mounted on a 288-pin PCB. Registered buffering reduces electrical load on the memory controller, allowing higher densities per channel. ECC circuitry detects and corrects single-bit errors during normal operation.

DDR4 2400 bandwidth ceiling

The PC4-19200 interface caps peak throughput at the rated transfer rate. Systems limited to lower memory clocks will downshift the module accordingly. Quad-rank density may restrict the number of modules per channel on some platforms. Verify maximum supported capacity and rank limits before installation.

Helstu kostir

  • 64 GB capacity handles heavy server workloads
  • DDR4 2400 MHz speed moves data quickly
  • ECC registered design corrects errors for reliability
  • CL17 latency at 1.2 V keeps efficiency high
  • 288-pin DIMM fits standard DDR4 server slots

Tæknilýsing

BrandA-Tech
Capacity64GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2S2Rx4 (4Rx4)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

What bandwidth does the DDR4 2400 (PC4-19200) interface provide?

The module operates at DDR4 2400, rated PC4-19200, delivering the standard peak transfer rate for that speed grade.

What physical slot and clearance does the 288-pin RDIMM require?

It fits a standard DDR4 288-pin DIMM slot; the registered design adds a register chip, so verify your motherboard supports RDIMMs and that heatsink clearance is adequate.

How is the module installed, and what step is often missed?

Align the notch with the key in the 288-pin slot, press firmly until both retention clips click, then confirm the system detects the full 64 GB and ECC functionality in BIOS.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.