Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 288-pin DDR4 ECC RDIMM module with black chips

A-Tech

A-Tech 64GB DDR4 2400 ECC RDIMM 2S2Rx4 Server Memory

SKU CH-1367-HMH9V

64 GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2 V operation for server workloads

  • Capacity64GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity handles heavy server workloads
  • DDR4 2400 MHz speed moves data quickly
  • ECC registered design corrects errors for reliability
  • CL17 latency at 1.2 V keeps efficiency high
  • 288-pin DIMM fits standard DDR4 server slots

Server-grade DDR4 ECC RDIMM

This 64 GB registered DIMM brings error-correcting DDR4 memory to servers and workstations that require data integrity under sustained loads. The module runs at 2400 MHz with CL17 latency and standard 1.2 V operation. It targets administrators upgrading compatible platforms that support registered ECC memory.

288-pin registered build with major-brand chips

The 2S2Rx4 (4Rx4) organization uses major-brand components mounted on a 288-pin PCB. Registered buffering reduces electrical load on the memory controller, allowing higher densities per channel. ECC circuitry detects and corrects single-bit errors during normal operation.

DDR4 2400 bandwidth ceiling

The PC4-19200 interface caps peak throughput at the rated transfer rate. Systems limited to lower memory clocks will downshift the module accordingly. Quad-rank density may restrict the number of modules per channel on some platforms. Verify maximum supported capacity and rank limits before installation.

I korthet

  • 64 GB capacity handles heavy server workloads
  • DDR4 2400 MHz speed moves data quickly
  • ECC registered design corrects errors for reliability
  • CL17 latency at 1.2 V keeps efficiency high
  • 288-pin DIMM fits standard DDR4 server slots

Specifikationer

BrandA-Tech
Capacity64GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2S2Rx4 (4Rx4)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Frågor om den här produkten

What bandwidth does the DDR4 2400 (PC4-19200) interface provide?

The module operates at DDR4 2400, rated PC4-19200, delivering the standard peak transfer rate for that speed grade.

What physical slot and clearance does the 288-pin RDIMM require?

It fits a standard DDR4 288-pin DIMM slot; the registered design adds a register chip, so verify your motherboard supports RDIMMs and that heatsink clearance is adequate.

How is the module installed, and what step is often missed?

Align the notch with the key in the 288-pin slot, press firmly until both retention clips click, then confirm the system detects the full 64 GB and ECC functionality in BIOS.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.