Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board DDR3 DIMM with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1866MHz ECC UDIMM Server Memory

SKU CH-V7B2-J69H1

An 8 GB DDR3 1866 MHz ECC UDIMM module for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC UDIMM design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation matches DDR3 standard voltage

8GB DDR3 1866MHz ECC UDIMM

This A-Tech server memory module provides 8GB of DDR3 capacity at 1866MHz with ECC error correction. It is designed for servers and workstations that require unbuffered DIMMs and data-integrity protection. The single 240-pin module suits systems with available DDR3 slots.

Thermals, noise and power draw

Operating at the standard DDR3 voltage of 1.50V, the module draws typical power for its class and produces no audible noise. Passive cooling relies on system airflow across the DIMM. The CL13 latency and 2Rx8 organisation keep electrical load consistent with other DDR3-1866 ECC UDIMMs.

Build fit and compatibility

The 240-pin DDR3 DIMM fits motherboards that accept unbuffered ECC memory at 1866MHz. It replaces HP part numbers 712288-081, 712288-581, 715271-001, E2Q93AA and E2Q93AT. Builders who need registered DIMMs, higher capacities per slot or a different DDR generation cannot use this module.

Helstu kostir

  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC UDIMM design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation matches DDR3 standard voltage

Tæknilýsing

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

How do I install this 240-pin DDR3 ECC UDIMM in my server, and which step is often missed?

Power down, open the chassis, align the notch on the module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module is detected at 1866 MHz.

What maintenance or replacement will this 1.5V DDR3 module need over its service life?

No routine maintenance is required; keep air vents clear so the DIMM stays cool, and replace only if memory diagnostics report correctable or uncorrectable ECC errors.

What limit appears first when this CL13 2Rx8 module runs sustained workloads?

The 1.5V standard voltage and CL13 latency set the thermal and timing ceiling; prolonged heavy use will hit the DDR3 1866 MT/s bandwidth limit before any other constraint.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.