Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board DDR3 DIMM with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1866MHz ECC UDIMM Server Memory

SKU CH-V7B2-J69H1

An 8 GB DDR3 1866 MHz ECC UDIMM module for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC UDIMM design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation matches DDR3 standard voltage

8GB DDR3 1866MHz ECC UDIMM

This A-Tech server memory module provides 8GB of DDR3 capacity at 1866MHz with ECC error correction. It is designed for servers and workstations that require unbuffered DIMMs and data-integrity protection. The single 240-pin module suits systems with available DDR3 slots.

Thermals, noise and power draw

Operating at the standard DDR3 voltage of 1.50V, the module draws typical power for its class and produces no audible noise. Passive cooling relies on system airflow across the DIMM. The CL13 latency and 2Rx8 organisation keep electrical load consistent with other DDR3-1866 ECC UDIMMs.

Build fit and compatibility

The 240-pin DDR3 DIMM fits motherboards that accept unbuffered ECC memory at 1866MHz. It replaces HP part numbers 712288-081, 712288-581, 715271-001, E2Q93AA and E2Q93AT. Builders who need registered DIMMs, higher capacities per slot or a different DDR generation cannot use this module.

Puncte forte

  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC UDIMM design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation matches DDR3 standard voltage

Specificații

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

How do I install this 240-pin DDR3 ECC UDIMM in my server, and which step is often missed?

Power down, open the chassis, align the notch on the module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module is detected at 1866 MHz.

What maintenance or replacement will this 1.5V DDR3 module need over its service life?

No routine maintenance is required; keep air vents clear so the DIMM stays cool, and replace only if memory diagnostics report correctable or uncorrectable ECC errors.

What limit appears first when this CL13 2Rx8 module runs sustained workloads?

The 1.5V standard voltage and CL13 latency set the thermal and timing ceiling; prolonged heavy use will hit the DDR3 1866 MT/s bandwidth limit before any other constraint.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.