A-Tech
A-Tech 8GB DDR3L 1333MHz ECC RDIMM 1Rx4 1.35V PC3L-10600 Kingston KTM-SX313LLVS/8G Server Memory
An 8 GB DDR3L 1333 MHz ECC registered DIMM with 1.35 V low-voltage operation for server and workstation upgrades
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity expands server multitasking headroom
- DDR3L 1333MHz speed matches PC3L-10600 spec
- ECC RDIMM design protects data integrity
- 35V low voltage reduces power draw
- 240-pin DIMM form factor fits registered slots
8GB DDR3L ECC Registered DIMM
This 8GB module runs at DDR3L 1333 (PC3L-10600) with CL9 latency and 1.35V operation. It uses a registered design with ECC and a single 1Rx4 rank on a 240-pin form factor. The stick is built with major-brand chips and serves as a direct replacement for the Kingston KTM-SX313LLVS/8G part.
Server and workstation upgrades needing ECC
Suits administrators expanding memory in systems that require registered ECC DDR3L DIMMs at 1333 MHz. Not for desktop boards that accept only unbuffered non-ECC memory or platforms limited to higher-voltage DDR3 modules.
1.35V DDR3L voltage
The low-voltage 1.35V specification is the decisive parameter; systems qualified for 1.5V DDR3 may not support this module, so verify the platform's memory-voltage requirement before ordering.
Helstu kostir
- 8GB capacity expands server multitasking headroom
- DDR3L 1333MHz speed matches PC3L-10600 spec
- ECC RDIMM design protects data integrity
- 35V low voltage reduces power draw
- 240-pin DIMM form factor fits registered slots
Tæknilýsing
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Spurningar um þessa vöru
How much power does the 1.35 V DDR3L module draw when the server runs continuously?
The DDR3L 1333 MHz RDIMM operates at 1.35 V, lowering power draw and heat output compared with standard 1.5 V DDR3 during all-day workloads.
What motherboard slot and memory controller features are required for this 240-pin registered ECC DIMM?
A DDR3 DIMM socket (240-pin) with registered ECC support and a chipset that accepts 1Rx4 modules is needed for the module to function.
Can this DDR3L 1333 MHz RDIMM share a channel with older 1.5 V DDR3 ECC DIMMs in the same server?
Mixing 1.35 V DDR3L with 1.5 V DDR3 is not recommended; the system will default to the higher voltage, negating the low-voltage benefit and risking instability.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.



