Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 1Rx4 1.35V PC3L-10600 Kingston KTM-SX313LLVS/8G Server Memory

SKU CH-RH8V-3ZJAJ

An 8 GB DDR3L 1333 MHz ECC registered DIMM with 1.35 V low-voltage operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server multitasking headroom
  • DDR3L 1333MHz speed matches PC3L-10600 spec
  • ECC RDIMM design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM form factor fits registered slots

8GB DDR3L ECC Registered DIMM

This 8GB module runs at DDR3L 1333 (PC3L-10600) with CL9 latency and 1.35V operation. It uses a registered design with ECC and a single 1Rx4 rank on a 240-pin form factor. The stick is built with major-brand chips and serves as a direct replacement for the Kingston KTM-SX313LLVS/8G part.

Server and workstation upgrades needing ECC

Suits administrators expanding memory in systems that require registered ECC DDR3L DIMMs at 1333 MHz. Not for desktop boards that accept only unbuffered non-ECC memory or platforms limited to higher-voltage DDR3 modules.

1.35V DDR3L voltage

The low-voltage 1.35V specification is the decisive parameter; systems qualified for 1.5V DDR3 may not support this module, so verify the platform's memory-voltage requirement before ordering.

Přednosti

  • 8GB capacity expands server multitasking headroom
  • DDR3L 1333MHz speed matches PC3L-10600 spec
  • ECC RDIMM design protects data integrity
  • 35V low voltage reduces power draw
  • 240-pin DIMM form factor fits registered slots

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How much power does the 1.35 V DDR3L module draw when the server runs continuously?

The DDR3L 1333 MHz RDIMM operates at 1.35 V, lowering power draw and heat output compared with standard 1.5 V DDR3 during all-day workloads.

What motherboard slot and memory controller features are required for this 240-pin registered ECC DIMM?

A DDR3 DIMM socket (240-pin) with registered ECC support and a chipset that accepts 1Rx4 modules is needed for the module to function.

Can this DDR3L 1333 MHz RDIMM share a channel with older 1.5 V DDR3 ECC DIMMs in the same server?

Mixing 1.35 V DDR3L with 1.5 V DDR3 is not recommended; the system will default to the higher voltage, negating the low-voltage benefit and risking instability.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.